Question about Frigidaire Refrigerators

1 Answer

I have a code 56 on the panel of my Frigidaire side by side refrigerator. I unplugged the unit and plugged back in but the code is still there. None of the buttons work on the panel.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Expert
  • 47 Answers

Diane - Sorry I don't have a Frigidare but check out this site - I have heard of this but your error code could actually be 5b which is the best that they can do to show a Sabbath Day setting that the frig is designed with
Check and scroll down this website to get the description way down on the webpage:
https://removeandreplace.com/2015/08/12/frigidaire-refrigerator-error-codes/

Posted on Feb 27, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
fridgetech
  • 473 Answers

SOURCE: Samsung side-by-side refrig is not staying cold

Look for signs of frost build up on back freezer panel. If there is build up then it has a defrost problem. I haven't had much experience with samsung but I beleive it has a fuse in the defrost circuit on the evaporator and that may be the defrost problem.

Posted on Oct 06, 2007

SOURCE: Frigidaire LEQ2152ES Electric dryer

Just to verify does it also beep six times? This model has the actual pushbuttons. Press all buttons lightly and see if any release. Disengage button.

Posted on Jan 03, 2008

Master_Tech
  • 770 Answers

SOURCE: freezer won't freeze

is the fan running ion the freezer is the compersser runing and the cond fan >??

Posted on May 10, 2008

  • 1 Answer

SOURCE: model rs2533sw panel not reseting after being unplugged

I had the same problem (panel would not start up - just flashed one dash after a power outage).

The solution above: pressing the top two buttons for 12 seconds (Power Freeze and Power Cool buttons) reset the panel and everything is working fine now.

Thank You!

Posted on Dec 30, 2008

  • 1 Answer

SOURCE: Affinity Washer: Will only display 56...Pau, Err on any button

This was exactly what was wrong with my washer!!!!!!!!!!!!!!!!!!!! Stupid Easy Fix! I would recommend leaving it unplugged until you are ready to undo the plug for the door lock. This was a perfect solution!!

Posted on Dec 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My side by side frigidaire was giving me a H1 code so i unplugged it for 3 days and as soon as i plugged it back in it gave me the H1 code. How do i fix this problem?


HI error means unit has detected temps are too high in either fridge or freezer. Since you’ve already unplugged it and code came back, you’ll have to determine what’s causing the temperature problems

Oct 05, 2018 | Frigidaire Refrigerators

1 Answer

Accidently entered incorrect code in temperature control pad and now the panel is frozen and registers 56 degrees on both fresh and frozen Frigidaire Gallery refrigerator FGHN2844LF2.


You have entered the control into "Sb," which is "Sabbath mode."
Hold the temp up and temp down buttons simultaneously for 5 seconds and the "56" should disappear...

Jul 18, 2016 | Frigidaire Refrigerators

1 Answer

I have a frigidaire PHSC239DSB5 That I unplugged to clean. Once the cleaning was done, I plugged the unit back in and it does not cool. I have turned off and on the cooling system. I hear the fan...


Good Morning friend, thanks for your post!

From what you have described you unplugged your Frigidaire refrigerator to clean it and now it is not cooling. You could have a possible short within the control panel or wiring harness. I would recommend performing a reset on your refrigerator and you can do that by disconnecting the power for at least ten minutes.
If that does not jump start your compressor you may want to make sure it is not in demo mode or the control is locked you should be able to notice any error codes on the panel. If you need additional help I would recommend contacting a professional technician for proper diagnosis and repair. -Matt

Mar 08, 2015 | Frigidaire PHSC239DSB Side by Side...

2 Answers

"OP" what is the meaning of this code refrigerator frigidaire


Good Morning friend, thank you for your post!

I see that your Frigidaire refrigerator is displaying an "OP" error code and you want to know what it means. An "OP" could stand for open thermistor. This could be a possible problem with your thermistor or control panel. In any case that it is a false error code I would recommend performing a reset on your refrigerator and you can do that by unplugging the power cord for roughly ten minutes. If that does not help resolve your issue I would suggest consulting with a professional technician for proper diagnosis. Hopefully this is helpful information. -Matt

Feb 12, 2015 | Frigidaire Refrigerators

1 Answer

The control panal on freezer door says 56-56 will not despence water or ice


Good Afternoon Friend,

I understand that you are receiving a 56 56 code on the display of your Frigidaire refrigerator, model# GLHS269ZDB. I also see that it is not dispensing ice or water, even though you have reset it by unplugging it. The 56 56 is actually SB SB. This tells me that your refrigerator is in Sabbath mode. To exit the Sabbath mode, press and hold the down arrow and the plus sign, simultaneously for 5-10 seconds or until the display changes. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your refrigerator status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Jun 09, 2014 | Frigidaire Gallery Series GLHS269ZDB 36"...

1 Answer

The digital read out shows 56 will not reset will not despense water or ice


Good Afternoon Friend,

I understand that you are receiving a 56 code on the display of your Frigidaire refrigerator, model# FRS26H5AS. I also see that it is not dispensing ice or water, even though you have reset it by unplugging it. The 56 is actually SB. This tells me that your refrigerator is in Sabbath mode. To exit the Sabbath mode, press and hold the down arrow and the plus sign, simultaneously for 5-10 seconds or until the display changes. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your refrigerator status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Jun 09, 2014 | Frigidaire FRS26H5AS Side by Side...

1 Answer

Control panel is locked up and displaying the numbers 56 56. Both compartment lights are out, water and ice not dispensing. Could it just be a door switch?


Good Afternoon Friend,

I understand that your Frigidaire refrigerator, is having trouble with the ice dispenser, control panel, and both interior lights went out. I also see that the numbers 56 56 are displayed on your panel. If the numbers are showing Sb, this tells me it is in the Sabbath mode. To get out of this mode you will need to press and hold the down arrow on the freezer side and the up arrow on the refrigerator side simultaneously for 5-10 seconds. If this does not work, I suggest resetting your appliance. You can do this by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power and check the control panel as well as the ice dispenser and lights. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your washer status has changed successfully. Hope this is helpful.

-Best Regards-
WP

May 30, 2014 | Frigidaire Refrigerators

1 Answer

HOW DO YOU REPLACE A START RELAY SWITCH ON A FRIGIDAIRE SIDE BY SIDE MODLE FRU26SA


Power off i.e unplugged
Open the back
Remove retaining clip on wiring side of compressor plastic cover.
NOTE wiring connections to terminals on the OLD relay. 1, 2 4 4 ect... make a simple wite color to terminal number sketch.
PULL off PTC relay WITH terminals by pulling HORIZONTALLY (Usually to the left / 9 O'clock position)
NOTE the thermal overload comes off WITH the PTC relay.
Remove wire from Thermal overload terminal and transfer the thermal overload to the new PTC relay.
Slide NEW PTC relay onto compressor terminals
Transfer remaining wires from OLD PTC to the correct terminal on the new PTC relay.

TEST compressor start before installing cover... PLUG in unit

After the test unplug the unit... reinstall the plastic cover and wire clip.

Reinstall back panel

Return unit to service.

Thanks for choosing FixYa

Kelly



NOTE the thermal overload will s akl

Sep 19, 2010 | Frigidaire Side by Side 26.0 Cubic Foot...

1 Answer

Freezer and refrigerator side temperature is automatically set at 62, when I reset it, it automatically jumps back to 62, what could be the problem???


Unplug the unit for about ten minutes then plug it back in and try resetting it. If that doesn't work you'll have to call in a tech. Solid state units have to have a professional there to fix.

Jul 09, 2009 | Frigidaire FRS3R5EMB Side by Side...

1 Answer

Samsung double door refrigerator/freezer is not holding the tempature in the refrigerator. When you attempt to reset the temperature and press "power cool" nothing... temp remains around 56 The freezer...


I just had (have?) this same problem. I called out the repair man and in the end he suggested that I buy a new fridge because of all the problems reported with my model (RS2555SL) on the internet. Anyway, after a while I heard what sounded like a fan trying to spin on the fridge side. I unplugged the unit, removed the inside back panel on the fridge side. The entire coils and the fan had iced over. I removed all the ice, plugged the unit back in and it is now working. I will still replace this unit because I probably only corrected the symptom but the problem remains.

Jun 15, 2009 | Samsung RS2556 Side by Side Refrigerator

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Refrigerators Experts

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Sal De

Level 3 Expert

2699 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Frigidaire Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...