Question about Frigidaire Refrigerators
Front display is dark except for the times when it "Beeps"
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
3 fast beeps is a code which is telling you that there is a problem with 1 or more of the memory modules, take them out and clean the contacts with an eraser and try again, if you have more than 1 try them 1 at a time so you can work out which is the faulty 1
Posted on Nov 14, 2008
SOURCE: 6 beeps on start up, no video
Without knowing what yo have for a BIOS, it is difficult to diagnose. The below link is a list of beep error codes for different BIOS types. Check your BIOS to see if it is one on the list and see what it means:
Posted on Dec 12, 2008
If your computer is beeping at you, 9 times out of 10 its going to be an issue with the memory or video. (more often the memory) Try re-seating both. If your still hearing the beep fest, below is a list of the most common beeps and what they
This will help you to find out what needs replacing.
Long beep followed by 3 sequential short beeps. This issue is linked to your Graphic card configurations
Short beep followed by three sequential long beeps You are facing a system memory problem
Beep- PAUSE- Beep- PAUSE- Two sequential beeps This error is linked to your CPU
Three beeps-PAUSE-Three beeps-PAUSE-Four beeps You have an issue with the video memory
Three beeps-PAUSE-Four beeps-PAUSE-Beep This is linked to an error with your Graphic Card
Four beeps-PAUSE-Three beeps-PAUSE-Beep You have a system memory problem
Five short beeps You are facing a problem with your CPU
Long constant beeps It’s a system memory problem
Short constant and high-pitched beeps The temperature of your CPU is too high
Posted on Jan 05, 2009
Is the beep a moderately high tone that lasts for about two seconds? If so, this is the firmware loading signal, which sounds only when the power button is held in on powerup. This would indicate that your power switch has a mechanical or electrical problem and is not releasing.
If this is not what you are hearing, please provide more detail.
Posted on Jun 18, 2010
Tips for a great answer:
Feb 03, 2016 | Refrigerators
Jun 25, 2015 | Refrigerators
Apr 25, 2015 | Refrigerators
Mar 11, 2015 | Refrigerators
Jul 13, 2013 | Fisher and Paykel Active Smart E522B...
Aug 25, 2017 | Televison & Video
Feb 23, 2011 | Refrigerators
Nov 08, 2010 | Samsung RS2630SH Side by Side Refrigerator
Jan 26, 2010 | Jenn-Air JCD2389G Side by Side...
May 14, 2019 | Frigidaire Refrigerators
45 people viewed this question
Usually answered in minutes!