My bizhub 250 shows c2211 error code - Konica Minolta bizhub 250 All-In-One Laser Printer

SOURCE: Bizhub error C2211

cant find this kind of error code, are you sure, that you have a right code and printer model ???

SOURCE: Our bizhub-250 receives a C2557

hi,

open and close front door cover to reset error.

If it persists you have to execute (TCR Toner SUPPLY)

Tell me if you need to execute it.

Bye.

SOURCE: BizHub 250 Malfunction Code C2557 - HELP!

I can even reach the "service mode".
The screen shows the error (c2557) and I can not access to anyother function.

SOURCE: bizhub 250. error c2152

Check and make sure there are no jams by the fuser ie: bits of paper in the paper path.

Ben

• 108 Answers
• Posted on May 19, 2010

SOURCE: bizhub 250 All-In-One Laser Printer: Error code C3451 wont reset using Utility key at s...

• The Fusing Roller Thermistor does not detect
the required temperature within 30 sec. after a
warmup cycle has begun; therefore, the copier
does not complete the warm-up cycle.
• The temperature of the Fusing Rollers does not
reach the required level even after the set period
of time has elapsed during a warm-up cycle.

You may have a bad fuser section. Another reset method is a small button located on the right side of the machine under on the scanner section. Locate your network port, then to the left of the port is a small cover that can be removed, behind that cover on the left is a small black button, use a paper clip or ball point pen and press the button, this will do a machine reset. When the operation panel abort starts to load hit the number 3 button, you should see a small back circle in the top right of the operation panel. This will give you the option to do a trouble reset.
If this does not work you will need a technician to come out and replace the fuser section, make sure they bring one with them so they don't have to reschedule and come back.