Can a wang longer be install in a Lavazza maxhine

Not in my Country #hehehe

You are not required to notify EPA that the PCB Transformer is no longer in service. However, you may do so and ask that the transformer be removed from the database.
http://www.qjpcb.com/ Skype : wang.michelle35

http://chipdrivers.com/driver/graphic-adapter/xfx/pv-t72s-wang/

Lavazza Products may be ordered online in Canada from the following site:

http://www.espressocoffeeitaliano.com/ourproducts.php

Contact Information:

Espresso Coffee Italiano of Canada Ltd. (authorized distributor of the Lavazza Espresso Point System)
201 Drumlin Circle, Unit #3, Concord, ON
L4K 3E7, Canad

Tel: 905-907-5049
Fax: 905-760-5606

Email: [email protected]

The electronic control board is defective, it must be repaired or replaced.
To get a dealer address send an email to: [email protected]. I could help you, but, I live in Canada. Guru

After a while the light will go off. but autozone should have cleared it for you. If you bought the part through them.

For Lavazza A Modo Mio only call 0800 599 9200 -they can help over the phone or if still no solution they will refer you to Lavazza UK who have the answers for AMM.

look at the chip download aida 32 and see there what is wrong posible the driver

First, you should not be using your espresso machine as an american coffee maker. It puts way too much pressure on the components of the machine. The standard cartridges are made to do 1.5 - 3.0 ounces of espresso. should you want to make a longer cup of coffee you need to get the aroma point gran caffe cartridges, lavazza code 427. this will enable you too get the longer cup of coffee without putting the added stress on your machine. Also it sounds like your machine mighy have a problem with the volumetric device. are you getting water in the capsule ejection drawer? should you want service you should call 781-393-2929. we are an authorized lavazza distributor and repair center.