What is Dynastic code C 6 on Whirlpool model WTW8240YWD

do a google search for your atv . found em all easily

A E1-F1 or E1-F2 is a faulty touchpad.
FixYourBoard.com has replacements about for NLA ovens.

They come with a two year warranty.
Reach out to us at 512-355-1108 or [email protected]

if its a Kenmore model then this message says that the button control board has lost sight of the main control board , but its been my experience that this maybe able to be reset and it may never come back or it will not reset and the control board will need replaced (50/50)


cycling power may reset this

Whirlpool Date Codes


To know exactly

What kind of problem are you having with the truck? Things like spark plugs need replacement or fuel pump, clogged fuel filter willnot cause codes in most cases.

Hi, you could tie a magnet to a piece of string or a stick and hopefully retrieve it :)

Narmer was an ancient Egyptian pharaoh of the Early Dynastic Period. Probably the successor to the Protodynastic pharaohs Scorpion and/or Ka, some consider him the unifier of Egypt and founder of the First Dynasty, therefore the first pharaoh of unified Egypt.

You didn't say what year, make and model. Power to the distributer come from the ignition switch. Diagnostics is a fuse.

F6
Shorted temperature probe
This code will occur if temp. probe is detected as shorted
continuously over 5 seconds.
Replace temperature probe. part no 29 Thermostat
Part Number: AP3038826 made by WHIRLPOOL
The above part and all other parts of your model can be foundin the link
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=260444&diagram_id=28263369#d28263369

hi
it looks like the electronic programmer it is not being read past that point.
suggestion get the programmer dynastic tested, some programmers can be reprogrammed or replace with anew one