How To Fix Dell Error Code 2000 0142? - Dell Computers & Internet

http://downloads.dell.com/manuals/all-products/esuprt_laptop/esuprt_latitude_laptop/latitude-e4200_service%20manual_en-us.pdf

It is an error code that is a common technical error that manifests due to poor quality prints and smudged color. It generally indicates that the printer firmware is outdated or the CTD sensor is not clean.Jan 27, 2021

Steps to Fix Dell Printer Error 009-654 - Tech Support Expert

https://techsupportexpert.com > Blog

Solved: DELL C1760NW ERROR CODE 009-654 - Printers

https://www.dell.com > community > Printers > td-p
Thank you for reaching out to us. The error code shows that there is an issue with the printer ADC sensor. If you have already restarted printer multiple times ...

• 
  

  CTD ( ADC ) Sensor Error on the E525w Dell Color Laser Printer

  https://www.dell.com > ... > Knowledge Base Article
  Feb 24, 2021 - Turn the power off to the printer and unplug from the wall outlet. · Power the printer back on. If the error still occurs continue to set 3.
• 
  

  C1765NFW Error Code 009-654 - Printers - Dell

  https://www.dell.com > community > Printers > td-p
  Apr 16, 2018 - Hi I have a Dell C1765nfw printer, was working fine, suddenly stopped working after giving a few "faint" pages..giving me an error 009-654,

great tips : https://www.errorcodeexpert.com/how-to-fix-dell-error-code-2000-0142/

Go to
http://support.dell.com/support/0148
For further support as you have a hard drive error.
Hope this helps.





How to run PSA Diagnostics

Article Summary: Instructions on how to run the PSA Diagnostics, and an Error Code list with possible solutions. Table of Contents:

1. Start the PSA Diagnostics
   
2. Error Code List
   

Step 1: Start the PSA Diagnostics

1. Restart the system.
   
2. At the Dell logo screen, press <F12>.
   
Note: Some systems do not have an F12 key, to access the boot options you have to press the <0> (zero) key at the Dell logo screen.
3. At the One Time Boot menu, press the <Down> arrow key to highlight Diagnostics, then press <Enter> to begin PSA.
   
4. Write down any error codes listed.
   
5. Use the list provided in the next section to see what the error code means.
   

If you receive an error during PSA Diagnostics, look below for the associating error code. If the Error

Error Code

Error Message

Link to Possible Fix

PSA 1000-0111
PSA+ 2000-0111

(Name of Exception) exception occurred at selector XXh offset XXh.

Contact Dell

http://support.dell.com/support/edocs/software/dtk/2.4/CLI/pdf/dtk24cli.pdf look here codes are posted