Question about Video Cameras

Open Question

Factory reset for sdr-b85300 - Video Cameras

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset password for a samsung SDE-3004N DVR home security system. There is no remote for the system and have lost the password.


Samsung Security DVR Default Password

For nearly all Samsung Security DVRs, the default password is 4321. If it hasn't been changed since setup, then you can just use that to access the DVR. The default password is included in the reset procedures for completeness. If you have changed your password or access code for your Samsung Security DVR since it was setup, or if you changed it during the initial setup, use that password in place of the default password. The password will be the latest password that was set on the DVR. If no password has ever been set, then it will be the default.

Steps to Reset your Samsung Security DVR

Samsung Security DVR Reset Procedure #1
  1. Reset the unit to factory by pressing both [MODE] and [PTZ] button for 5 seconds
  2. Then enter the 4321.
Samsung Security DVR Reset Procedure #2
  1. Reset the unit to factory by pressing both [MODE] and [CH2] button for 5 seconds
  2. Then enter the 4321.
Samsung Security DVR Reset Procedure #3 This reset will work on Android based DVRs only. All steps are performed on the device itself.
  1. Turn the device Off
    Wait 2 minutes
    Press and hold the following buttons
    • POWER,
    • HOME
    • VOLUME UP
  2. The unit should power on. Once it does, you can release power.
  3. Use the volume UP and Down buttons to select "Wipe/Factory Reset" from the recovery menu.
  4. Activate the reset using the HOME button.
    When the DVR goes through it's setup again, it will be at factory defaults. The password will be 4321.

Samsung Security DVR Reset Procedure #4 This reset will work on SDR models. It may also work on other models.
  1. With just the cameras showing, press the following in quick succession using the remote:
    • Freeze
    • Alarm
    • Freeze
    • Alarm
    • Freeze
    • Menu
    • Enter
  2. Make sure you press them quickly, one after the other. If it doesn't work the first time, try doing it several times. It can take many tries to get the timing right. If/when it works, you should get a screen that gives you the option to reset.
Samsung Security DVR Reset Procedure #5 This reset will work on SDR models where procedure #4 failed. It may also work on other models.
  1. Press the DVR Button to place the system in DVR Mode
  2. Press:
    • Freeze
    • View
    • Return
As with Procedure #4, you may need to press Freeze, View, and Return in in quick succession a few times to get it to work. The timing can be tricky.

Samsung Security Reset Procedure #6 Courtesy Sergio Ayala
To factory reset the SDR-B74301
  1. Reboot the DVR
  2. Once the DVR has rebooted, enter the following sequence on the remote:
  3. UP, RIGHT, 5, 3, 3
  4. You will be prompted to do a factory reset. Confirm
This has been confirmed by several people. Thank you, Sergio! If this works for you, please thank him in the comments below.
CCTV Networking Technical Support

Sep 18, 2017 | Samsung Home Security

1 Answer

I need to reset my password on a samsung sdr-5100n


You will need to do a factory reset unless your phone has a PUK code. Contact your cell service provider for more info on the PUK code.

Jun 22, 2017 | Samsung Cell Phones

1 Answer

SDR- C75300n factory reset.how i do????hellllp!!!!


Have a look in the manual - there may be an option in the menu system.

Aug 04, 2016 | Video Cameras

1 Answer

No picture,had sound,think i changed setting now no sound.


Just do a factory reset to this set, and check. To do it, you've to enter its service mode option. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/

Feb 25, 2014 | Hitachi 55HDS69 55 in. Plasma Television

1 Answer

White Screen


Hello
You Problem with flex or display or camera.
You can buy it here.
Substitution is possible independently.
Panasonic SDR T70 display

Panasonic SDR T70 flex

Dec 29, 2013 | Panasonic SDR-T70 Camcorder

Not finding what you are looking for?
Video Cameras Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Video Cameras Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Cindy Wells

Level 3 Expert

5909 Answers

The Knight
The Knight

Level 3 Expert

76060 Answers

Are you a Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...