Ricoh Pro 907 sc 593 - Ricoh Office Equipment & Supplies

Check out the links

Error Codes > Ricoh > MPC305SPF > Code 524

Printcopy.info https://printcopy.info > brand=Ricoh > code=524
Code: 524 ; Description: Transport motor error. The machine detects a High signal from a transport motor lock detection for 2 seconds after the transport motor ...

Missing: 1600. ‎' Show results with: 1600.

RICOH Error Code List - mtechsinfo.com

mtechsinfo.com http://www.mtechsinfo.com > files > Ricoh Erro... PDF Image compression errorHard disk drive error Aficio 551, 551P, 700, 700P SC- ... SC-524. Duplex end fence drive problem. SC-530. Bypass motor locked or fuse FU106 ...
14 pages

Error Codes > Ricoh > MPC306 > Code 524-00

Printcopy.info https://printcopy.info > brand=Ricoh > code=524-00
Code: 524-00; Description: Transport motor error The machine detects a LOCK signal from Transport motor for 2 seconds when the motor is activated. https://www.google.com/search?q=Ricoh+Aficio+MP+1600.+Error+SC+524

and finally
https://www.mtechsinfo.com/files/Ricoh%20Error%20Code%20List.pdf

..

Question edited tor a lot more clarity and add MAKER, but NO MODEL NUMBER! All questions need full make and model.

Ricoh Aficio 200 - Error Code: SC390

PrintCopy .info https://printcopy.info > code=SC390
Code: SC390; Description: TD sensor error 1. The TD sensor outputs less than 0.5V, 20 s after the TD sensor initial setting has been performed.
Missing: cod ‎' Must include: cod

SOLVED: How fix sc390 cod of ricoh

Fixya https://www.fixya.com > ... > Ricoh
The closest thing is the sc390 code, which means either the toner density sensor or the developer has gone bad, and typically replacing the PCU can fix that ...

• 
  

  SOLVED: Code SC 390

  https://www.fixya.com > ... > Aficio MP6001 Copier
  Code SC 390 the code SC390 occurs when power on the machine. ... Service code sc 390 RICO Aficio 1015 coppier ... Sc 390 cod. what this?

Error Code sc 390

Copytechnet https://www.copytechnet.com > 56632-sc-390-a
Sep 24, 2011 - I've got an Aficio 1018 that's generating sc390 after every 10 copies. I recently fitted new drum, cleaning blade and developer and changed ...
Missing: cod ‎' Must include: cod

• 
  

  Error code SC 390

  https://www.copytechnet.com > forums > 47571-error...
  Dear all Experts i often got an error code sc 390 on my ricoh aficio 270.kindly tell me what to do with this problem.

RICOH Error Code List - mtechsinfo.com

mtechsinfo.com http://www.mtechsinfo.com > files > Ricoh Erro... PDF SC-390-2. Toner density sensor error. SC-391. Developer bias problem or FU103 on Aficio 550/650 Image storage address error. Aficio 551, 551P, 700, 700P.
14 pages

http://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/62104-ricoh-pro-c-901-a.html

http://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/62104-ricoh-pro-c-901-a.html

There is a tech bulletin on this number 16 Service call... -Carl

Ricoh Copier Error Code SC 554 problem Reseting SC 554 error code on Ricoh copier
Press CLEAR MODE(yellow) key,
Press 1 , 0 , 7
Press and hold down CLEAR/STOP (red) key for more 5 sec.
Press in the SP Mode( on the touch pane)
Go to sp5810 and reset SC code
Open the front door turn OFF the power main switch, and turn it ON
Ricoh Error Code SC 554
Heating roller overheat (hardware error)
The heating roller thermistor detects 240°C or more.
Defective PSU
Defective IOB
Defective BCU
Defective fusing control system
1. Replace the PSU.
2. Replace the IOB.
3. Replace the BCU.

SC 544
Heating roller thermopile (center) error 3 The thermopile detected a temperature over 260?C. • TRIAC short, AC drive board defective • Defective IOB 2 • Defective BCU
Related SC code: SC 553, SC563 1. Do SP5810 to cancel the SC fusing code. 2. Replace the AC drive board. 3. Replace the IOB 2. 4. Replace the BCU.
GO TO SERVICE MODE AND SP5810 to Clear - Check temp inputs - SP5803 150, 151, 152

That is an oil supply pump error for the fuser. It probably needs to be replaced.

SC558 is a Oil supply motor error The machine detects a motor rotation error for 5 seconds after the oil
supply motor has rotated for 5 seconds. ?? Oil supply motor defective
?? Oil supply unit defective
1. Replace the oil supply motor.
2. Replace the oil supply unit.