Fining instructions for tin can robot - Toys

Contact the manufacturer or return and exchange the product from where ever you bought it.

Sounds like the clutch: here is a link to the instruction manual:

http://www.aisin.at/assets/manuals/RSSDENG.pdf

It has a fault fining section page 50

Building the gearboxes is a pain using the instructions. instead use the 2 strait plastic bit with 2 screw holes in each end. put the nuts and screws rough the holes and use it to hold the nuts in place while closing up the gear box case. No more will the moter magnet pull it out nor will they be the wrong way up or fall out. Now to get my arduino and moter shield to control the arm....

go to www.4m-ind.com then click on instructions, then enter tin can robot in product search. then open the PDF.

go to www.4m.com then click on instructions then enter tin can robot in product search then download the PDF

The instruction manual can be found here:

http://www.therobosapien.com/users-robosapien-manual.htm

You can either view it online or download it as a PDF file.

You can download the instructions from the Hasbro website:

http://www.hasbro.com/common/instruct/SW_R2-D2_Interactive_Droid.pdf

Blessings!

http://www.wowwee.com/en/support/robosapien

Address: Room 410-411, 4/F Houston Centre, 63 Mody Road,
Tsim Sha Tsui East, Kowloon, Hong Kong. Tel.: (852) 2795 5010 Fax: (852) 2795 4308 E-mail: [email protected]

Try to scan from windows photo gallery it may work......................




good luck...