ME SALE ESTE ERRO EN MI KONICA MINOLTA BIZHUB C360 PCL XL ERROR ERROR: EXTRA DATA OPERATOR: READIMAGE POSITION: 4876

try re-installing printer driver - see if any more up to date printer driver exists for the operating system ? and the printer model number ?

https://www.manualslib.com/manual/1250645/Konica-Minolta-Bizhub-C360.html?page=657#

model number is a konicaminolta machine

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try this site

Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

have tech come out reflash the firmware

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Trying loading the PS driver

Hi richard_hutc,

It would appear that you have an issue with the finisher/sorter on the side of the machine.
Specifically, C-1183 means the elevator motor hasn't ascended or descended correctly.
Open and close the finisher and look for any paper jams in this area.

Good luck

C1183
Elevator motor ascent/
descent drive failure
• The elevator tray lower limit sensor (PC13) is not turned ON
even after the set period of time has elapsed after the main
power switch is set to ON.
• The elevator tray home position sensor (PC11) and elevator
top face detection sensor (PC12) are not turned ON even
after the set period of time has elapsed after the elevator
motor (M11) is energized.
• The elevator tray does not stop at the position for the specified
tray after the elevator motor (M11) is energized (beginning of
descent operation) and the elevator tray lower limit sensor
(PC13) is turned ON.
• The elevator top face detection sensor (PC12) is not turned
ON even after the set period of time has elapsed after the elevator
motor (M11) is energized (beginning of ascent operation)
when paper is being fed out.

Hi,

Download The PS driver from hp.com.. u might be using a PCL 6 driver.
Got to www.hp.com
Click on support & drivers.
Select Download drivers & software
enter ur product.
Select the OS on ur comp.
Download PS driver & install it.

Try This
All the Best!!!!!!!!!!1