I need a manual for my Samsung Dryer. Model number is DV42H5000EWA3. How do I get one.

that code means you have a bad thermistor.if you send the model number whoever helps you can look your dryer up,open the door,look around the opening where you put the clothes in and you'll see a tag with model and serial just need the full model number

You need to replace the dryer belt and the dryer drum bearings.

Go to this site to download your manual.
http://laundry.manualsonline.com/manuals/mfg/samsung/samsung_washer_product_list.html

Find your model number and also, go online and call Samsung.

With the model number, go to "SearsParts" and using your model number, type in the information and they will present you a picture so you can see if the felt is replaceable. Also, call Samsung and ask the same question. It very likely is replaceable. I just put one on last month. You will need to take the machine completely apart to do this job.
Be blessed.

Try an internet search? You will need the model number.
Good Luck,
Bill

Hi.

I am sorry but unfortunately I could not find the manual for Nexxt 500 gas dryer in my database. The full model number may help me to find the file more than the model name.

A manual for Bosch gas dryer is available in this forum. Subscription to the forum is free: http://applianceguru.com/view_topic.php?id=21241&forum_id=19
When you ask for the manual always include the full model number(e.g.WTMC332SUS ). There are different Nexxt 500 models.

Regards.

G.

Is this a front-loader? Samsung hides the filter behind the lower panel on the front.

You can view your machine's user manual here (you need your model number):

http://www.samsung.com/me/support/productsupport/download/index.aspx

Hi, You can get them on amazon, click here: Amazon com samsung washer dryer stacking kit and take a look. Wish you best of luck. Cheers

hauzen washing machine sew hr-125

What problem are you having, the problems i have seen with kenmore elites are below.


1. when you press start and release dryer shuts off

for this problem, change the board in the console

2. not producing heat

for this problem, check to see if 220 is getting to element, check to see if you are getting 220 from outlet, check your thermal cutoff on heating housing, check your heater relay which is located in top console.