I Changed the lamp and TV still does not work. No picture nor sound, just a buzzing noise. When i press the on button the TV acts as if it is going to start up but only buzzes and makes a squealing noise. After it tries to start up and doesn't happen, then it sounds like it tries to shut itself off and then tries starting back up again. This continues for a minute or so and then finally does shut itself off showing all three lights again (timer, power, standby/high temp). i took out the light and the lamp ballast and turned on the tv and i still acts as if it is going to start up. It still makes The buzzing an squealing noise. Spent so much money on this TV can someone give me a solution...thank you
Possible bad color wheel...
Pull the lamp out & look inside where the lamp sends the light-
does the color wheel look defective? If so,replace it.
Or, the lamp ballast may be bad.After that,usually replace
complete engine.
360 views
Usually answered in minutes!
What is the part number of the color wheel? I am also having this same problem. We ordered a new bulb ($150) and that wasn't the problem. They are telling us it is probably the color wheel. Does anyone have the part number for this for the HL-R6167W?
tsame tv, made a pop noise, has no picture, sounds like a loud static noise coming from backside. i took off the lower right panel (looking from rear) and there looks like a funny light and intermediate buzz noise coming from lower circuit panel? whats the problem? Paid ALOT for this TV, happen to know what the problem is?
×