Question about Lands Phones

1 Answer

How to register new handset to old base station on e2116

I have old base station was working, but phone antenna broke. Ordered used same model phone and want to register it on this old base station....

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Expert
  • 59 Answers

Usually you can just put the new hand set on the main base station. Let it set for 20 minutes or until charged. It should read your other base at that time

Posted on Feb 02, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Uniden DCT648 register phone problem

On the Base Station select HS Registration then on the Handset hold # for 2 sec

Posted on Apr 13, 2008

  • 79 Answers

SOURCE: Programming old handsets to a new base

Cancel the old handsets registration at the previous base unit if desired.
For additional handsets, you must register each of them at the new base unit. Only one handset can be registered at a time. A handset will be assigned anextension number at registration.


Make sure the base unit and the other handsets are not being used. Program the same way as the extra handset you bought.

Registration must be completed within 1 minute.

Posted on Aug 20, 2008

  • 5 Answers

SOURCE: bought new phones kxtga110ex and want to register handset from kxa141es

I can send you a manual. Just email me on gorbuz@yahoo.com

Posted on Nov 04, 2008

  • 5 Answers

SOURCE: How to clear all registrations from the base

One has to completely deregister all handset by pressing end and # keys together till complete de registration is shown on handset screen. if the de registration is not done as above stated method the hand set will not register will show connecting on hand set screen.

Posted on Nov 07, 2008

  • 1 Answer

SOURCE: Register additional handsets on a Uniden phone

From: Uniden Customer Support

On most models you can find an option in the menu for De-register? In that case you would select that option and select to deregister the handset.
TRU88 models you go to the main menu and go to De-register HS select yes to deregister the Handset.

DCT5 and DCT6 models: Press menu on the handset. Go to System Reset and Press select. Go to Deregister HS and press select. Arrow up to yes and press select. Then go back into the menu. Go to system reset and press select. Arrow down to Replacing the base and press select. Arrow up to yes and press select.

DCT7 models: Press and hold "end" and "#" until the system reset menu appears on the display. Then follow the instructions from above for the DCT5 and DCT6 deregister procedures once your into the menu.

TRU4 and TRU5 models: Press and hold xfer/del and end until "de-register?" appears. Use the plus+ button to go up to yes and press select.

To register any of the following phones please see you owners manual under either:


•Register handset or


•Register the digital security code.

Posted on Mar 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I DEREGISTER MY BASE STATION?


If you want to replace a handset or re-assign the designated handset number of a registered handset, you must de-register all the handsets and then individually register each handset.
To de-register all handsets:
Press and hold
FIND HANDSET
on the telephone base for about 10
seconds (until the IN USE light on the telephone base turns on and starts to flash), then release FIND HANDSET
.
Press and release
FIND HANDSET again. (You must press FIND HANDSET
while the IN USE light is still flashing. The IN USE light flashes for
approximately seven seconds.)
All system handsets show
CONNECTING...
The de-registration process
takes about 10 seconds to complete. All handsets show
NOT REGISTERED
when the de-registration completes.
If de-registration fails, you might need to reset the telephone and try again.
To reset:
Pick up the registered handset and then press
/FLASH
.
Press
OFF/CLEAR
and place the handset back in the telephone base.
-OR-
Unplug the power from the telephone base, then plug it back in.
note:
You cannot de-register a handset if any system handset is in use.

After de-registering, proceed with registering process:
If the handset screen does not show LOW BATTERY
or HANDSET X, you will need to charge the handset for at least five minutes before registering to the telephone base.
To register a handset:
Place the unregistered handset in the telephone base or charger. If
PRESS FIND HS 4 SEC ON BASE
does not appear on the handset screen after a few seconds, remove the handset and place it in the telephone base or charger again.
On the telephone base, press and hold
FIND HANDSET
for about four seconds (until the red IN USE light on the telephone base turns on) and then release the button. The handset shows
PLEASE WAIT...
and it takes about 10 seconds to complete the registration. The handset shows
HANDSET X REGISTERED
(X represents the handset number assigned)
and you hear a beep when the registration completes.

Nov 13, 2017 | Lands Phones

5 Answers

I cannot register the handsets to the new base station I had an 8100-2 base that quit working. I bought a new 8100-1 base. Can I change the MAC ID on the phones so they will accept the new base station?


Hi,

If you cannot register the handset then here are some possible causes and solutions for them.

Cause 1:The handset and the base station were not prepared for registration.
Solution: Unplug and then plug in the power adapter.

Cause2:The handset or the base station has not been entered into registration mode.
Solution: See User Manual for correct registration of base station and handset.

Cause3:The base station is registered full.
Solution: Press [Page Key] on the base station to page the registered handsets, then perform the deregistration operation. Finally, register the handset you want to use.

Here is few more of additional info. if you want:

Register the Handset to the Base Step 1:
Place the accessory handset in the base station of the system. For some simple systems this may be all you need to do to register the new handset. If so, the LCD screen will read "Registration Complete."
Step 2:
Press the "menu" button on the base station, scroll down to "register handset" and press "ok."
Step 3:
Press and hold either "#" or "OK" (depending on the brand) on your handset until your hear the indicator tone. At this time the LCD should confirm the handset is registered.
Reset Handsets with the Base Step 1:
Clear the registration information from the base if you want to register your handset to a new base.
Step 2:
Hold [] and [#] down on the base for a minimum of 5 seconds or until the "System Reset" menu appears.
Step 3:
Choose the "deregister" option from the menu and scroll down to the handset you wish to remove.
Step 4:
Press "OK" to de-register the correct handset. Press "yes" when you are asked if you are sure, and wait for the confirmation tone.
Reset Handsets without the Base Step 1:
Hold [] and [#] down on the phone for a minimum of 5 seconds until the "System Reset" menu appears.
Step 2:
Choose the "base unavailable" menu, select "yes" and press the "OK" button.


Goodluck,
Please don't forget to rate the solution.






Mar 21, 2008 | Vtech IP 811 Cordless Phone

1 Answer

How do you register a old uniden SSE27 handset to a new Uniden SSE37 base


The following is taken directly from the SSE37 owners' manual:

Registering a handset
If you see a "not registered" message on a handset,
you must register it to a base before using it.
1.
On the base, open the menu and select
Register Accy.
2.
On the handset, press and hold #/DND
until the handset display says
Handset Registering (about 2 seconds).
3.
Wait until the handset display says
Registration Complete (about 30 seconds),
then pick up the handset.
If you don't hear a dial tone or the display says
Registration Failed, charge the battery completely,
then try again.


Good luck!

Feb 19, 2015 | Uniden Lands Phones

2 Answers

Phone displays a message saying no link to base when it is closer to the base?


Hi,

Following may be the cause for getting no link to the base.

1. The handset has lost communication with the base unit.Move closer to the base unit, and try again.

2. Confirm that the base unit’s AC adaptor is plugged in.

3. Raise the base unit antenna.

4The handset’s registration may have been cancelled .Re-register the handset.

To Register, follow the below steps.

Headset: Press MENU and then press ‘0’ ‘0’

Base unit: Press and hold HANDSET LOCATOR until the CHARGE indicator flashes.

(After the CHARGE indicator starts flashing, the rest of the procedure
must be completed within 1 minute.)

Handset: Press OK, and then wait until the handset beeps.

Your handset is registered to Base unit.

Thank You

Aug 18, 2010 | Panasonic KX-TG2620 Cordless Phone

5 Answers

Deregister a ds6322-4 without the base


for the Vtech cordless phones model DS6322-4 models

In the handset press
*331734# and the menu button, yur handset will be deregistered.

Enjoy unlocking :-)

May 06, 2010 | Vtech Lands Phones

2 Answers

My phone says no link to base but I am right beside it.


Sounds like the antenna on the base station is not receiving, or the cordless handset is not transmitting -OR- the sets have never been registered to the base station (please look up registering to base station, if the set has never been registered)

Did the cordless set work before?

The base station or the handset may just have a hick up, I would un-plug the base station and leave it un-plugged... now get all the cordless set(s), and take out the batteries from the cordless set(s). Wait for about 15 seconds for all the power to drain out of the sets, then re-install the batteries.

Once all the cordless sets are back up and working, plug in the base station and wait for about 1 minute.
This forces the base station to re-establish and link between the base station and the cordless sets.

Good luck

May 11, 2009 | Panasonic KX-TGA101S Cordless Handset

1 Answer

Merging 2 siemens gigaset 4215 systems (one base with 2 phones + 2 phones)


If you're trying to get 5 handsets to work with one base, it won't work. The 4215 can only handle 4 handsets, the base handset plus 3.

When I had to replace the base of my 4 handset system, the base handset still worked. Therefore I had an extra handset which couldn't be used. So I decided to buy another base. Now I have 6 handsets which can be grouped 4,2 or 3,3.

Jun 15, 2008 | Siemens Gigaset 4215 Cordless Phone

4 Answers

TWX977 submersible unable to base register


push menu on base station - select register phone

push # sign on twx977 phone at the same time

phone will register on 9485 base station and unit

Sep 09, 2007 | Uniden TRU9485 Cordless Phone

3 Answers

Registering a new phone


With a little searching I was not able to confirm this phone could handle more than one cordless handset. Are you replacing a defective handset or trying to add a second. If adding, do you know if it can handle the second unit (is it advertised on the box, in the user guide, etc?) If replacing, you most likely have to de-register the old handset on the base unit before you can register a new one. If you are adding, try de-registering the working handset anyway and registering the new one. If the new one registers and you cannot re-register the once working phone you will know either the system cannot handle two phones or (if the new one will not register but you can again re-register the original) that the new handset has a problem and should be returned.

Jul 10, 2007 | Uniden Cordless Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Cindy Wells

Level 3 Expert

5833 Answers

Marvin
Marvin

Level 3 Expert

84540 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...