Question about Heating & Cooling
Call a gas company and let them do it. it will need a new gas orifice installed
Posted on Jan 23, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
John Mac here...the solution was that we had shut the pilot off for the summer, and birds had made a nest inside the heat exchanger...coming in through the direct vent. Cleaned out the nest, and it works perfectly. My technician recommends that I leave the pilot buring through the summer to prevent this in the future.
Posted on Aug 30, 2007
Merry Lynn, there will be no physical differences between Natural Gas heaters and Propane Gas heaters. Check the model number of the unit, it may have a N or P or LP printed at the end of it to distinguish which gas it uses. The plate that is attached to the heater should indicate the type of gas it uses. DO NOT try to convert this heater to another gas.
Merry Lynn, there will be no physical differences between Natural Gas heaters and Propane Gas heaters. Check the model number of the unit, it may have a N or P or LP printed at the end of it to distinguish which gas it uses. The plate that is attached to the heater should indicate the type of gas it uses.
DO NOT try to convert this heater to another gas.
Posted on Oct 16, 2007
Yes, the design of the combustion chamber is limited at how much fresh air and combustion air can enter it. If you lengthen the venting, you will be causing more restriction and there will not be enough natural air movement to make it work. It will start, run for a minute or two and poof out. Not to mention you will be circumventing it's UL rating and if you sell your home with it installed, you are liable for any fatality or damage. Do you want to risk that? Don't even think of doing it! There are "Box" heaters out there sized from about 5,000 Btu's on up to 100,000 Btu's. Check the web.
Posted on Sep 19, 2008
ODS/Pilot may be clogged make sure you clean it out according to the instructions in your owner's manual. If you need a copy of the manual let me know and I will try to find it for you. If it is still not working it could be the gas regulator or the ignitor cable. For Glow warm parts contact Master Parts at 800-446-1446 or you also can find them online at www.masterparts.net. I hope this helps you!
Posted on Jun 30, 2009
I think you mean a milli-volt system. I went to the cozy heaters website and found the wiring diagram in an owners manual for a similar unit, a W355. I bet the wiring diagram will work for your.
Posted on Dec 10, 2009
Tips for a great answer:
Jan 12, 2016 | Heating & Cooling
Dec 20, 2012 | Rinnai Energy Saver Direct Vent Wall...
Sep 21, 2011 | Rinnai Desa Vent-Free Infrared Gas Heater:...
Nov 09, 2009 | Empire Hight Efficient Direct Vent Wall...
Oct 30, 2009 | Empire Hight Efficient Direct Vent Wall...
Oct 20, 2009 | Rinnai RHFE-1004FA 38,400 BTU Energy Saver...
Sep 17, 2008 | Empire DV-215 Direct Vent Natural Gas...
Dec 05, 2006 | Empire GWT-25 Wall Mounted Panel Heater
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: