Take a number 2 pencil eraser and clean the silver contacts on remote.
Is the Battery orientation proper or have you mistakenly inserted them the wrong way
SOURCE: HRC200 shows current temp
http://12.153.20.74/manuals/119426-01A.pdf
page 24 shows to unlock hold both buttons down
SOURCE: Remote 15-2144
Hello, you can try the search method,
you do this by either holding down the device button eg: TV or if you
have one the "magic" button for three seconds, a light should then
flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
Many thanks
Mark
(www.sparky-uk.com)
SOURCE: Model HRC200 remote
You cannot get lower than the 66 F. The manufacturer has set that as the default lostest setting.
73 views
Usually answered in minutes!
×