Question about Dacor Ovens

Open Question

My dacor oven will heat in convection .it did not get enough heat to self clean, the thermostat works on convection I can get 495 degrees. On bake long time to heat up.What is wrong the rsd30s?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: dacor oven ECPS127S will not heat after self clean

the problem was fixed by opening the panel between the oven cavity and the touch panel just behinf the door. you can look through the grill but to trip the reset you must unscrew the panel. you will find the reset back behind the wires Looks a red button nestled on top not very open but it should be there> i do have to say i found a step by step description on this site. but right now i can't tell you who exactly he was.

Posted on Feb 24, 2008

Ad
  • 2 Answers

SOURCE: Oven won't heat.

Thanks for the tip. Had the same problem, everything seemed to work except for the heating elements. Removed the vent cover inside the door just below the control panel. Found the reset button and also found one of the large black power wiires had come loose from its connector. Turned off the power at the breaker box, checked for voltage with a meter and re-attached wire connector with insulated pliers. Oven works now. Lets call this failure "poor workmanship at Dacor".

Posted on Feb 03, 2009

jumptrout51
  • 3361 Answers

SOURCE: oven won't heat after self cleaning

There is a overload thermostat located on the rear of your oven that needs to be replaced.
Self cleaning operations are not recommended by this technician.

Posted on Mar 02, 2009

  • 1 Answer

SOURCE: Oven will not heat up on bake broil or convection cook.

I justn encountered the same problem (Model KERS507Y). Haven't checked yet...but am suspecting the Thermal fuse. Have you solved the problem?

Posted on Apr 09, 2009

  • 2 Answers

SOURCE: GE JTP56 double oven controls OK top OK bottom no heat

have you inserted the business card as described in the solutions?

Posted on Jun 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace thermostat on kenmore elite


Possibly none of these videos are exactly like your oven but it should give you enough information to get the job done.
Note that some of the videos are not for ovens.

Replace thermostat on kenmore elite oven YouTube

KENMORE ELITE Walloven Parts Model 79048033800

Oct 16, 2014 | Kenmore Elite 30 In. Electric Self-clean...

1 Answer

I self-cleaned the convection oven on my sc302tw, and now it does not heat on any settings, convection, bake or broil. It is 14 years old.


Looks like the sensor has tripped... on my Bosch oven, I opened the back. Connected to the thermostat is a switch with a little button which pops out to prevent the oven from overheating... push in the button to reset it and it should work

Nov 06, 2013 | Thermador Ovens

1 Answer

Dacro Wall oven (electric) does not heat past 345 degrees on bake or convection bake but broiler works and bottom oven works fine (for bake, convection bake and broil).


it could be the oven temp sensor rod located near the top of the inside of the oven,or possibly the bake element has a hot spot on the element and can no longer pass enough current thru this spot to correctly heat to your settings a hot spot on the element will look discolored in this area

Jul 28, 2012 | Dacor Ovens

3 Answers

I have a Bosch HBN 455 double oven with the convection oven on top, and a regular oven on bottom. The unit is about 5 yrs old. We recently ran the Self Clean mode, and it seems like it has malfunctioned...


Hi,

Do you see any Error Message on the Display?

If not, then it should not be a Concern. More often this could be Thermal Fuse on the Back of the Unit ( On Most Models ) will stop the Broil and Bake from Turning ON. You would just start a bake cycle and the temperature will sit at 100 and something degrees and never raise.appliance.

Let me know, once you check the same.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Dec 28, 2009 | Bosch HBN 455 Stainless Steel Electric...

1 Answer

Dacor 1.5 years old convection oven...not heating


Flip both oven breakers HARD to the "off" position, then back on. If it did not help - you might have a problem with a relay on the control board or a failed bake element.
Grab a flashlight and check the element on the bottom (if you can see it). DO NOT TOUCH THE ELEMENT! If you find any bulging or cracking on the element - it'd out. Before removing the element turn the oven off on the breaker panel.
PS Model number is needed to find the part numbers.

Oct 22, 2009 | Ovens

1 Answer

My upper oven/ convection function on my dacor ecs230b will not heat


Bake and convection bake settings both use the bottom bake element to heat. It would be unusual for bake to work without conv. bake working. You also have pure convection which uses a different element surrounding the conv. fan on the back of the unit. If you press a feature and nothing happens it's the touch pad. If it comes on then turns back off it's probably the ERC (clock). If it comes on and wont heat only in pure conv. possibly an upper relay board or element problem.

Sep 22, 2009 | Dacor ECS230 Epicure Electric Double Oven

1 Answer

Oven won't heat after self cleaning


There is a overload thermostat located on the rear of your oven that needs to be replaced.
Self cleaning operations are not recommended by this technician.

Mar 02, 2009 | Whirlpool Ovens

1 Answer

Dacor oven ECPS127S will not heat after self clean


the problem was fixed by opening the panel between the oven cavity and the touch panel just behinf the door. you can look through the grill but to trip the reset you must unscrew the panel. you will find the reset back behind the wires Looks a red button nestled on top not very open but it should be there> i do have to say i found a step by step description on this site. but right now i can't tell you who exactly he was.

Feb 16, 2008 | Dacor ECS127 Epicure Stainless Steel...

1 Answer

My Dacor wont heat, broil or convection after self cleaning. No heat but everything else works The bake, broil, and convection elements on my Dacor CPS130 electric wall oven will not heat.  The oven has...


like another person stated-from the front behind the door, take off the 6 screws and the cover by the latch. there is an "oven hi temp limit switch" It is crome with 2 heavy black wires connected to it. On the back side of this is a small red button which will reset the limit switch. I had the same issue (everything worked except the any of the heating elements) and quickly resolved.

Jan 07, 2008 | Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

Tyler T

Level 1 Expert

35 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Paul Bade

Level 3 Expert

1662 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...