Question about Hotpoint Dishwashers

Open Question

How to remove lid of hotpoint aquarius dwf30 dishwasher

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
johnychel
  • 796 Answers

SOURCE: Hotpoint Aquarius dwf30 Dishwasher not

may be there is some block in the spray pipes...
have you checked them.....

try to clean it once

Posted on May 12, 2008

Ad
  • 1462 Answers

SOURCE: hotpoint aquarius dwf30 dishwasher

you can plumb into hot but there are some snags
first hot water pressure is often a lot lower than cold so the machine may take a long time to fill
second if the water is too hot it will destroy the resin of the water softener and you will see brown marks on the crockery.
third it a bit uneconomical as you will use a lot of hot water

Posted on Jun 25, 2008

  • 86 Answers

SOURCE: Where is the element on a Hotpoint Aquarius

It sits in the base of the machine and you would need to remove the complete top section of the dishwasher to gain access to it, which involves removing the door first, then the balance weight and finaly the stainless steel top section

Posted on Mar 17, 2010

  • 3247 Answers

SOURCE: my hotpoint aquarius dwf30 will not drain so will not wash...

Do you hear the motor run or is there deadly silence when you select drain.
Does the wash cycle start - do you hear water getting in and washer arms move?
Are there any lights flashing?

Posted on Jul 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aquarius DWF32 and dealing with water softner


Good idea to check levels yourself, but wear rubber gloves as dishwasher salt will leave your hands very sore, simply remove cover from salt tank, using a wooden spoon handle or similar check salt level and refill if required, replace tank lid, never wait for warning lights, they may never come on, good luck.

Feb 18, 2013 | Hotpoint Aquarius Washing Machine Front...

1 Answer

Aquarius dwf30 dishwasher lights are on but wont work


SEE the w .diagram
2) test the switch door, it is open or defective will not close the starting relais for turn the main motor.
God bless you

5_10_2012_10_45_22_am.gif5_10_2012_10_45_38_am.gif5_10_2012_10_46_15_am.gif

May 09, 2012 | Dishwashers

1 Answer

Hotpoint dishwasher dwf30 washing as normal but no heat


Hi,
Check your heating element..
A bad heating element causes many problems in dishwashers...

Dishwasher Problems The Heating Element not Working
How to Replace the Dishwasher Heating Element
Dishwasher Maintenance

heatman101

Asker's Testimonial " explanation very clear. will give it a go and seehow simple it was. thanks Ronnie " - ronnieshomes

./

Oct 24, 2010 | Dishwashers

2 Answers

My hotpoint aquarius dwf30 will not drain so will not wash...


Do you hear the motor run or is there deadly silence when you select drain.
Does the wash cycle start - do you hear water getting in and washer arms move?
Are there any lights flashing?

Jul 06, 2010 | Hotpoint 24 in. DWF32P Free-standing...

1 Answer

Where is the element on a Hotpoint Aquarius dwf30 dishwasher?


It sits in the base of the machine and you would need to remove the complete top section of the dishwasher to gain access to it, which involves removing the door first, then the balance weight and finaly the stainless steel top section

Mar 17, 2010 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Drive belt came off Hotpoint Aquarius WT540


At each side of the lid there is a small plastic cover. Remove these then take out the screws. Lift the lid at the front and push it back then lift off.
Thankyou for using Fixya.

Jan 27, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Hotpoint aquarius dwf30 dishwasher


you can plumb into hot but there are some snags
first hot water pressure is often a lot lower than cold so the machine may take a long time to fill
second if the water is too hot it will destroy the resin of the water softener and you will see brown marks on the crockery.
third it a bit uneconomical as you will use a lot of hot water

May 18, 2008 | Hotpoint 24 in. DWF32P Free-standing...

1 Answer

Hotpoint dwf30 freestanding dishwasher


your leak might be caused by a faulty door gasket.as far as your other problem try turning off the power at breaker for 30 sec. to reset cpu

Oct 24, 2007 | Hotpoint 24 in. DWF32P Free-standing...

1 Answer

How do i remove a rear control knob on a hotpoint wma50s machine


to replace your timer dial take the lid of by unscrewing 2 screws at the back of the lid were your dial is look down a small oval shape opening u will see a screw undo it and the dial will come off m8

Feb 18, 2007 | Hotpoint Aquarius WMA52 Front Load Washer

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Brad Brown

Level 3 Expert

18060 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...