I have got a new konka u7 phone and i am having hassels getting the 24 hour off the clock can you help

Dozens of models to choose from. All questions on Fixya need 'make model (what it is)' as the first 3 words.

Here are some guesses. The 'control cover' is where you put the back-up battery.

To change the 12/24 hour time format, open the CONTROL COMPARTMENT COVER on the bottom of the clock and adjust the 12/24 TIME FORMAT switch to the desired format .

Self-Setting Clock - Brookstone

Instruction Manual - Brookstone

Brookstone https://manuals.brookstone.com > ... PDF 12/24 HOURS TIME DISPLAY SETTING 1. The "12h" or "24h" will start flashing in LCD2 (Default setting 12h).

• 
  

  of 6 Page 2 of 6 - Brookstone

  https://manuals.brookstone.com > ... PDF
  Features: x WWVB Radio Controlled Clock (Atomic Clock) x Time in 12/24 hour format x Manual time setting option x Time Zone setting: +/- 12 Hours from GMT.

People also ask
How do you convert a 24-hour clock to a 12-hour clock?"); display: inline-block; height: 24px; width: 24px;"> How do I change my alarm clock to 24-hour clock?"); display: inline-block; height: 24px; width: 24px;"> What is 12.30 pm in 24-hour time?"); display: inline-block; height: 24px; width: 24px;"> Feedback

Setting The 12/24 Time Format; Setting The Daylight Savings ...

ManualsLib https://www.manualslib.com > ... > User manual
Brookstone TIMESMART Self-Setting Clock Radio Manual Online: setting the 12/24 time format, Setting The Daylight Savings Time. The 12 Hour Format Is Set As ...

GOOD DAY,

SIMPLE,
OBEY THE INSTRUCTION BELLOW AND PROBLEM WILL BE SOLVE .
OPERATE YOUR SETTING CLICK ON IT THEN,
CLICK ON PHONE TO SETTING ,
THEN CLICK ON TIME AND DATE SETTING.
MAKE CORRECTION ON YOUR TIME AND DATE ACCORDING TO YOUR
ZOON,
LOCATION,
AREA E.T.C

PLEASE NOTE ,
IF DATE AND TIME IS INCORRECT YOU WILL NOT BE ABLE TO GET YOUR WHATS APP INSTALL.

THANKS,
GOOD LUCK.

Destroy the device. No other way.

Get Into Settings and when 12h is displayed as choice press set.

There are several models of your watch not all of which appear to have a 12/24 hour display format.

Try this extract from a manual; press the MODE button six times to enter the 12/24 adjusting setting and then use the START/STOP or SPLIT/RESET button to change the time.

Press the mode button to return to normal operation.

When you're car is off, press both the hour and minute buttons at the same time. Hold them until the clock switches from 24 hour to 12 hour. By doing this with the engine off, you keep the temperature reading in Farenheit.

look for the clock or watch symbol on the keypad. When you press it, it will show you a 12 hour(normal time) or 24 hour(army time indication).Select the correct time by pushing the hour then minute buttons. Once that is done, press the clock symbol again whick accepts the setting.

Normally caused by trying to put 24 hour times into a 12 hour clock or US date format into a European or vice versa

There are three buttons, let's call them 1, 2, and 3, from left to right.


Clock
Time setting

A. 12 AM, PM or 24.00 h
With the clock in the time readout mode, keep
button (2) depressed for 4 seconds -12 AM, PM
or 24.00 flashing. After pushing button (1), either
a 12-hour (AM + PM) or a 24-hour setting
program can be selected. If you only want to
change the display mode, push button (3). The
clock then returns to its normal timekeeping
function.

B. Hours
Push button (2) a second time - hour display
flashes. Set hour by pushing button (1). After
pushing button (3)*, the clock returns to the time
readout mode with new hour setting.

C. Minutes
Push button (2) once more - minute display
flashes. Set minute by pushing button (1). Upon
pushing button (3)*, the clock is started -
accurate to within 1 second.

Stop watch function
The stop watch can only be set in motion if the
clock is in its normal timekeeping mode and not
during setting operations.
A. Push button (3) - 00:00 display appears;
B. Push button (1) - stop watch is on;
C. Push button (1) a second time - watch stops.
(Additional times can be added by pushing button
(1) again - stop watch keeps running. Push button
(1) once more to stop timing.)
D. Push button (2) - 00:00 display appears;
E. Push button (3) - normal timekeeping mode.

If button (3) is pushed during operation A and
B, the setting procedure must be restarted
(push button (2)).