Turn the volume off on a Lexmark MX410de - Lexmark Office Equipment & Supplies

Is the scan glass clean, has the imaging drum reached it's end of life?

Check the User's Guide below. Page 196.

Regards,

http://www.lexmark.com/publications/pdfs/2007/mx71x/UG/EPS/MX71X_UG_en.pdf

Just press the Home button > Setup > Fax Setup > Dialing and Sending > adjust the volume.

From the printer home screen control panel, touch the Setup button > Fax Setup > Ringing and Answering > Ringer Volume. Adjust to your preference.
Hope this information has been helpful.

1. Press Power to turn off lexmark X4270.2. Unplug your lexmark X4270 from the wall outlet.3 Check for paper jams.
4 Plug in your all-in-one lexmark X4270Cartridge
if everything is ok still the problem persists->The cartridge carrier is jammed.1. Turn off you all-in-one lexmark X42702. Unplug the all-in-one lexmark from wall outlet 2.Open control panel 3.open the cartridge access door 4.Make sure the cartridges are snapped in properly 5.check for objects obstructing the cartridge carrier 6.plug in your all-in-one printer 7.press power to turn on teh printer.

This should fix teh problem.

To turn off the ringer on the Lexmark X5070, go to Fax Mode then press Menu > use the arrows, choose Fax Setup then hit check > use arrows, choose Ringing and Answering then hit check > use arrows, choose Ringing Volume then hit check > use arrows, choose Off then hit check. To re-enable the volume, follow the same path. Hope this helps.

Hi, You can get it downloaded at : www.nodevice.com/driver/company/Lexmark/Printer.html
www.lexmark.com/
www.driverslab.com/drivers/Printer/Lexmark/9/63.html
Regards,

Download the driver from the lexmark website.
You should turn off the printer and the computer.
Unplug the printer. Turn on the computer. Bring it all the way up. Turn off the computer. Plug in the Lexmark. Turn on both machines. Install the printer driver.

Hello,
You will probably find all you need here:
http://downloads.lexmark.com/perl/downloads/downloads.cgi
hope this helps

There should be a slide bar on the left side.