What is the proper spark plug for honda gc160?

It should be a Honda GC160 engine.

OEM sparkplug is a NGK BPR6ES @ .030 in. gap

new spark plug? flooding may have fouled the old one.

The Honda 5.0 gc160 owners manual calls for an NGK BPR6ES for proper heat range. Should be available at any Lawnmower shop or online at ebay

2800 psi your gonna blow the car over with that thing lol

You have trash in your carb....remove the carb and inside the bowl remove the float and needle valve. clean the valve and seat and replace...should fix you up

• 10w30 hd motor oil

go to YOUTUBE.

usually honda uses 0.024in spark plug gap, if you are using new plugs they specifically say that they do not require being gaped, if you are maintaining old plugs use 0.024in as the Honda standard.

Did you check the gap between the magnet on the flywheel an mag? Unplug the stop wire an see how that works. Sometimes the switch is bad. Are the magnets on the flywheel, did you set the gap on the flywheel to mag correctly? Did you do the simple thing an change the plug they go bad more than anything else.

what about it