Question about Camping, Backpacking & Hiking

1 Answer

What is the replacement bulb for a FP lantern model #72384

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,367 Answers

I believe you are referring to a Finbury Park lantern. The following site sells FP lanterns and bulbs. I suggest you query them with the specifics.

https://www.lights4living.com/elstead-finsbury-park-lights/s463

I hesitate to suggest other "bulb" sites as they might lack the ability to find the bulb simply by the lantern ID. If the bulb has an ID number, that would help.

Here is one such "bulb" site:

https://www.1000bulbs.com/?msclkid=85883f8c924112a60229634ff913f1ec&utm_source=bing&utm_medium=cpc&utm_campaign=Light%20Bulbs&utm_term=cf18dde841%20bulbs&utm_content=1%20Metal%20Halide

Posted on Apr 26, 2019

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 973 Answers

SOURCE: trying to find replacement bulbs for our Swissgear

You can find the bulbs you need at this link; http://www.bulbs.com/eSpec.aspx?ID=14393&Ref=Light+Bulbs%2c+Ballasts%2c+Fixtures+and+More&RefId=0

Posted on Jun 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the bulb of the 6V Eveready Lantern if bulb won't come out


Drop a couple of drops of WD 40 on the bulb retaining ring. Let site overnight and in the morning it will easily unscrew. Note: be sure you use only a couple of drops as you don't want to get it on the reflective lense

Sep 27, 2014 | Energizer Eveready Utility Lantern Uses 6V...

1 Answer

How to test a flashlight bulb


To test a flashlight bulb you use an Ohm meter which will detect a broken filament or an open circuit within the bulb. If the bulb is bad it will read "OL" if it's good it will read "00.0"

Jun 14, 2014 | Energizer Eveready Utility Lantern Uses 6V...

1 Answer

Rayovac 360 sportsman lantern wont work


Since batteries and bulbs are new/ok, check for a bad connection. In older version using 4 lantern batteries, open the battery compartment by unscrewing the knob on top of lantern. The lantern bottom comes off once unscrewed (of course you did this to change batteries). There is a "C" clip on the lantern center shaft; remove this by prying with screwdriver or with pliers. Carefully raise the battery contact plate and check slip-on wire connections. Clean as needed (Scotch-Brite works well) and reconnect. Squirt some contact cleaner in exposed switches, work switches back and forth. Inspect circuit board for obvious corrosion or damaged parts (this damage may "total" the lantern). Re-install plate aligning grooves with ribs. Install batteries and test.

Nov 01, 2012 | Camping, Backpacking & Hiking

1 Answer

How do I change the bulb of the 6V Eveready Lantern?


If it is the yellow floating lantern you have to remove the black plastic stub on the underside of the reflector using needlenose pliers to wiggle and slightly pull until it releases and the bulb will come out.

Jan 06, 2011 | Energizer Eveready Utility Lantern Uses 6V...

3 Answers

Coleman rechargable lantern Model 5327A750. Have not used it in a while have left it on charge for over 24 hours. the night light works but the main light does not go on. Replaced the bulb and still...


just read the charging instructions. Charge for 16-18 hours. If stored for more than 6 months recharge for the full 16 hours. Do not leave the lantern on after the battery has stopped, has overdischarging the battery can cause problems in recharging to a full charge. If this does happen, switch lantern to off and recharge for 40 hours.YES 40 hours. Only the LED is the only light to be used while charging. If you hane the other light on hi or low the battery does not charge.

Hope this helps

Oct 24, 2010 | Sport & Outdoor - Others

1 Answer

Coleman rechargeable lantern: Charged overnight - not working, replaced bulbs - not working. What could it be:


Check the battery with a volt meter to make sure you have the correct voltage. If not, replace battery. If correct voltage, bypass switch to determine if it is good or not. If not, replace. There really isn't much to go wrong on the lanterns except the bulb or battery.

Jul 20, 2010 | Coleman Camping, Backpacking & Hiking

3 Answers

I have a GE Hurricane lantern model # 17000, how do I get it apart to put new batteries in it? There is an arrow on the bottom of it pointing to oppen one way and close the other, but nothing is budging.


I have the same latern. Apply a bit more force to rotate the bottom lid in a counter-clockwise direction. There are threads on the inside of the botton lid. To replace the battery or bulb you go through the botton of the lattern.

Jun 30, 2009 | Camping, Backpacking & Hiking

Not finding what you are looking for?
Camping, Backpacking & Hiking Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Camping, Backpacking & Hiking Experts

Tom Chichester

Level 3 Expert

52423 Answers

ray gallant
ray gallant

Level 3 Expert

63374 Answers

Kardoc

Level 3 Expert

5111 Answers

Are you a Camping, Backpacking and Hiking Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...