My torch will not light or Spark what do I do

They are not repairable. You just buy a new one for $7.42

https://www.google.com/search?q=eagle+butane+torch

..

https://www.youtube.com/watch?v=o5szBvrPx4s

There is no flint.
It uses a piezoelectric igniter. Not really replaceable.
Point it at yourself at arms length and see if you can see a spark when you press the button to start it.
Here is a video which shows how to adjust the air-gas mixture when the torch is new.

try to open up the part where the spark would come from. there should be a screw on the bottom or top to open it. This is where the flint would be.

The flint is probably worn down or it broke (you can buy new flints at pretty much any convince store around they are i believe $1-2 for 5 of them.

replace the flint and you will have a spark.

Torch goes to ground side where gas will flow out of it. Use a tig torch 17 if water cooling is not needed or a size 20 for water cooled one.

Put a torch on the probe. If the flame comes on them the thermocouple is weak.If nothing at all replace the safety valve.That is if you have a standing pilot. If you pilot is an electric one then it should be so bright it is hard to look at but if it is dim orange it is weak.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

It has become my experience that the trouble is in the torch head, especially after the torch head has gotten hot during use. Replacing it may solve your problem.

Well it sound like you have all the components working. Try lighting it with a torch or long match or something. If it lights, then you may need to adjust the spark-er. You also may need to adjust the pilot. It may be too much pressure, which will blow out the flame, or its not enough gas. Make sure the pilot orifice is clear.