Bosch she43m starts runs for 10 minutes then restarts itself

what is your model number is then we can get started then okay

Sounds like a crank sensor.

what is the part number you are changing?

I have the same problem, the dial to select the dry program is making a bad contact causing it to stop. Try using a different program.

I tried to clean the dial but it didn't help.

water is in the base and the float switch is activated. you must remove the water to deactivate.then hit the drain and cancell. let me tell you a quick joke .Im a old bosch tech and i had a call with the same problem. as soon as i got there i notice mouse droppings.the customer had a tech come by and told her she needed a circulation pump amodule the whole thing.wrong!!! what had happen was a mouse had made a mouse bed with the white packing foam and pulled it under the float in the unit. so the unit thought it had water in base and it went into drain mode . I removed foam and problem solved.

check latch on dishwasher side of the unit to make sure it has `nt got loose they make them so you can remove them when the unit is discarded so children can`t get trapped in side

you need to have car scanned for codes and it sounds like it is due for a major service

i dont have an answer... i simpkly have a similar problem. just bought and installed Bosch SHE45M06UC dishwasher - and nothing seems to fit in the racks. Can one get other bottom racks of a different design?

replace motor drive,,,defective motor...onthejob