My 2.0 Keurig lid does not close tightly, is it shot?

check latch and container for debris --

Try cleaning were it closes

Try this site for repair manuals: https://www.ifixit.com/Device/Keurig_Coffee_Maker

First open and close the lid again to ensure the brewer was prepared to brew BEFORE you close the lid on a kcup. Failing that, you could try unplugging the brewer for a few seconds, and trying again once the brewer has indicated it is ready to brew.

I have 2 Keurig coffee makers and have found that if you make sure the seal connecting to the water source and the bottom are tight and the lid is pushed down with the coffee in it, tight it reboots itself. Blinking lights should stop. Also I have found that if the filter needs cleaning sometimes that stops it. Keurig is really great at troubleshooting and replacing their struff call the 1800 # if you don't get results.

Try taking the water jug off again and try closing it

Hi,

Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.

Keurig CoffeeBrewer not making a full cup of Coffee
heatman101

,.;
';
][\

Hi,
Check the bottom needle...it is plugged...
Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.

Keurig CoffeeBrewer not making a full cup of Coffee
heatman101

Hi,

Here is a tip that I wrote about how to register your Keurig Coffee Brewer, get manuals, and cleaning or troubleshooting guides.

Keurig Registration, User Manuals, Cleaning, and Troubleshooting

heatman101

It takes about 3 minutes to brew. You cannot use a clear coffee mug (scensors won't detect it)

You should be able to turn it on, Then place k-cup in holder, Then close lid and water reservoir lid will pop up and you add desired amount of water. Then push lid down, place mug under spout and the blue light will light up and you push taht. Within 3 minutes you should have some coffee