Question about Life Fitness Exercise & Fitness
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 9100 life fitness treadmill
Sounds like you need a new lower board replacement. You can get that for that treadmill by call lifefitness or sportsmith.com Please rate me good
I’m happy to help further over the phone at https://www.6ya.com/expert/howard_079189dd4959a511
Posted on May 01, 2009
Error 1 - Start up error. This is caused because the belt was commanded to move and the opto (speed sensor on the motor) has not seen any movement or the belts movement was interrupted prior to it reaching its commanded speed. To fix Verify opto operation in Diagnostics, Motor Test
Mode, Section 2. Verify DC voltage at connector P6 pins 1 and 2. Verify that LED 4 on the Motor Controller flashes as the motor moves. Let me know if you need any more help. Fitness Fix-It
Posted on Mar 24, 2010
SOURCE: Fet error message
The FET error message is caused by the driver transistor on the motor controller has shorted out. Unfortunately, the fix is replacing the motor controller.
Posted on May 07, 2010
Tips for a great answer:
Feb 08, 2014 | Life Fitness T3 Treadmill with Advanced...
Oct 13, 2013 | Life Fitness 91Ti Treadmill
Oct 17, 2012 | Life Fitness Lifestride 9100 HRT...
Oct 10, 2011 | Life Fitness T3 Treadmill with Advanced...
Nov 17, 2010 | Life Fitness T5i Treadmill
Feb 17, 2010 | Life Fitness T3 Treadmill with Advanced...
Mar 22, 2009 | Life Fitness T3 Treadmill with Advanced...
Feb 28, 2009 | Life Fitness Remanufactured Next...
48 people viewed this question
Usually answered in minutes!