Use this function to initialize protect passcode and administrator's password.
1. Press <Mode>, <*>, <6>, <1>.
2. Press either [Initialize Protect Code] or [Initialize Admin Password].
3. Press [Yes].
Press <Mode> about two seconds until you hear the beep twice.
When you press " * ", you will hear short beeps.
SOURCE: Konica Bizhub Password Reset
Konica Bizhub c350 default password is 12345678 give that a try
SOURCE: How do you do a hard reset on a Konica Minolta BH 600?
To recover/change the Administrator password perform the following;
1. Enter the Service mode.
2. Press STOP-0-CLEAR to enter the Enhanced security mode.
3. Enter Administrator Password setting, and enter new Password.
SOURCE: I have konica minolta bizhub
You dont specify what you want the password to. So here are some options to try.
If you want admin access to the Fiery print controller the default password is "Fiery.1"
The default operator password for a Creo server is "colorserver"
I'm not positive about the default admin password for the C500 but I'd try these.
eight zeros: "00000000"
or: "12345678"
If these don't work chances are someone has changed them from the default. On the Fiery or Creo this usually means a software reload. On the machine a service rep can probably reset the admin password.
SOURCE: i wanna know how to reset the maintenance time konica minolta bizhub 750
bizhub c252 how do you reset enter serial number
9,155 views
Usually answered in minutes!
×