2 stations coming on together - Car Audio & Video

Request from manufacturer

try here

Manual Playmobil set 4302 Train Main station


https://playmobil.abapri.com/en-gb/building-instruction/playmobil-6343-train-station-platform-1.html

Remove the batteries from both the sensor and weather station. Keep both units close together on the same table. Press any button on the weather station 20 times to remove any random energy from it. Replace batteries in sensor and then in weather station. Do not press any buttons on the weather station until the sensor data appears on screen. It worked for me!

The Antenna itself could have come loose from the Back of the Radio

The Amp is normally in-line as part of the Antenna

If it is plugged in properly, then you should replace the antenna and cable (they normally come together

Hello
There are 6 preset position available for each radio band.
For programming, Radio must be ON. Tune to a station. Press MEMO/DEMO. Press any button 1 to 6. The tuned station will be memorised on the number you select by button press. Repeat using a new station and preset number. There is no atu preset option available with this device. You have to store stations you want according to your preference. Only 6 station positions for each band [total 12 positions] together with AM and FM bands.
To recall the stored stations, press the desired number 1 to 6.

Look at the wiring on the timer. What are the colors of each of the wires from station 1 to station 9. Is there only one cable of wire coming in to the timer or are there two?
It sounds more like a wiring problem than a timer problem.
Are those 3 stations together somewhere?
Gary

Basically Time capsule is same as Airport extreme base station added with a hard drive to take wireless backup.Put same Network Name and password in both Time capsule and airport base station.Suppose your are making TC as a primary base station and Airport extreme as a secondary base station. Select WDS in both the base stations .In "Wireless Mode" select"Participate in WDS network" in both the base stations.Dont change rest of the options.Put TC Mac id to Extreme base station and extreme Mac ID to TC.now open the airport option in your laptop and check.you can see a single network name.Its DONE.Njoy using wireless

Look at the wires on station 3 make sure it is not connected to the other station some times when installing the timer people get the common wire crossed with the same station and it will activate other station as well. Simply put i believe your wires are together.

Your vehicle needs servicing. Clutch plates might have worn out. Go to the nearest service station to enjoy the joy ride again.

Depending on your location and the type of antenna. If you are on the converter box when you scan for channels, how many do you receive? If you go back to analog or the way you were set up before how many stations did you receive? Some stations have not gone completely to digital as of yet. Other stations are in process and are not to full power for digital as of yet. With the box you may have to rescan every week or so until everybody gets their act together.