To use your SanDisk Dual USB Drive (OTG) on your Mobicel V4 smartphone, follow these steps:
1. Make sure your Mobicel V4 supports USB On-The-Go (OTG) functionality. Not all devices have this feature, so it's essential to verify its compatibility beforehand.
2. Connect the SanDisk Dual USB Drive to your Mobicel V4 using the micro-USB or USB Type-C connector (whichever is compatible with your phone's port).
3. Your Mobicel V4 should recognize the USB drive automatically and prompt you with a notification or a file manager app may open automatically. If nothing happens, proceed to the next step.
4. Go to the Google Play Store on your Mobicel V4 and search for a file manager app that supports OTG functionality. Some popular options include ES File Explorer, Solid Explorer, or Total Commander. Install the file manager app of your choice.
5. Launch the file manager app and navigate to the "Storage" or "External Devices" section. You should see the SanDisk Dual USB Drive listed there.
6. Tap on the USB drive's icon to access the files stored on it. From here, you can copy, paste, or manage files just like you would with any other file manager.
7. When you're finished using the USB drive, make sure to safely eject it from your Mobicel V4. This can typically be done through the file manager app or by going to the system settings and selecting the USB device to eject.
It's important to note that the specific steps may vary slightly depending on the file manager app and the Android version running on your Mobicel V4. However, these general instructions should help you connect and access files on your SanDisk Dual USB Drive using your smartphone's OTG functionality.
SOURCE: sandisk u3 cruzer micro usb device 16gb is not
My dear! first install software only without attaching USB when your USB required the software or driver then attach it or if your software does not required USB attach during installation, you have to attach it after the installing software. May it require reboot your system. Now your USB sandisk u3 cruzer micro device will work.
thank you
SOURCE: SanDisk microSDHC 16GB formatted to 1GB
place it back in computer, go to start/my computer right click your drive that contains the disk, select properties/format. format using the "fat" system and make sure you select the capacity in the drop down list to match your disc.
SOURCE: 16bg usb flash drive that only shows having 250mb of memory
right click ny computer click manage than go to disk management and click you ubs and delete the partition of you usb and repartition it. waring do not do any than to local disk (C:) in the partition
SOURCE: where is sandisk servising center in guwahati
just take it back to the place of purchase im sure there will be some sort of assistance available it should be still under warranty you will need to update/reinstall drivers right click to reinstall drivers if you can see your usb drive but its not working ports (com&lpt) right click update driver if this fails to fix the problem check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems to a computer and its parts
if you want you could have a look through all of you devices to make sure the all drivers are installed for these devices
click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X
if you need more help with this post a reply
which country is Guwahati in
hope it helps
SOURCE: can a sandisk 16gb flash drive be repaired?
Try the flash drive in another computer, and if the problem is still there, the product may be corrupted.
If the product is still in it's warranty period, you should go to the manufacturer's service center, and they will replace it free of cost.
If the warranty period is over, just buy a new one.
Hope this helps, Mrityunjay.
72 views
Usually answered in minutes!
×