I set up thr connections and everythiung but i cant put a password on it so how do i do that

please explain problem in more detail

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Have you tried removing the battery leave it out for 3 hours then when you put battery back in turn it on and instantly hit reset

1. Plug it in2. plug it into your modem 3.plug the ethernet wire into your pc and the router. 4. depending on the router if its linksys, open your browser and go to 192.168.1.1 username is admin and password is admin. if the router is D-Link go to 192.168.0.1 and the username is admin and there shouldnt be a password. 5. put an encryption by going into the security setting of your router. 6. put a password to your router so nobody can access it without your permission. 7. go on all your computers and connect them to the network. while connecting it will prompt you to insert the password. insert the key that the router generated for you in the security settings. 8. you are now done. you should have no problem with the internet connection.
please rate thank you gzambito

Hi,

DO YOU WANT TO CONTACT INTERNET THROUGH WIFI OR GPRS?

ANY WAY IN BOTH FOLLOW THE BELOW INSTRUCTION:

MENUE - ALL SETTING - WIRELESS CONTROL

1- AFTER INTERANCE YOU MUST TAP ON " DATA CONNECTION " FOR GPRS ON.

OFCOURCE THIS RELATETED TO YOUR NETWORK PERMISSION.

2- FOR WIFI YOU CAN TAP ON " WIFI " STCTION . IN THIS CASE YOUR PHON TRYING TO

SEARCH YOUR " WIFI " WHICH YOU USE IT IN THE NAME OF WIRELESS ON YOUR PC

AFTER FOUND , TAP ON YOUR OWN WIRELESS WHICH SHOWN WITH SOME OTHER

WIFI WHICH IS IN RANGE.... OK AFTER TAP ON YOUR OWN WIFI , THE PHONE REQUEST

YOU TO INTER THR PASSWORD " THE SAME PASSWORD WHICH YOU INTER IN YOUR

WIRELESS OF YOUR PC . AND ASK YOU TO CONFIRM IT AGAIN .

BE CAREFUL TO MENTION THE PASSWORD SAME .

THEN THE ABOVE OF YOUR PHONE SHOWN MARK OF WIFI ACTIVITY .

NOW YOU CAN REFER TO YOUR BROWSER AND USE OF INTERNET .



GOOD LUCK


gorbesia

Hi there.

Follow these few simple steps.

1. From the main menu, navigate to the "Settings" icon (Wrench)
2. Enter the "Settings" and search for the "Internet", should be on the third page. Enter "Internet"
3.Choose "Connection Settings" and then select Connection 1's "None".
4. Then "Search for Access Point". Choose the one needed.
5. Input its password if any.

Ok, Save Settings, Yes, and you are good to go!

hi lianamoto to reset thr mototblur put in thr email and thrn put in fotgot password, Now the phone should send a link to reset the password to yout email that you use to set up your blur account in the first place. hope this helps.of not you can go to thr motorola website.

I’m happy to help further over the phone at https://www.6ya.com/expert/ronald_e152e07e272e4f27

bro its not a big deal!! c ur blutooth settings...n thr vil b an option about visibility of blutooth dvice......n, thr, select always visible option or watevr u want....n thn u'll b able 2 xchnge stuffs!1 ;-) hope this works brthr....
-suraj

Are you looking for the wireless network key or password ?
Is there any computer online using the router.
If not then you will need to connect the computer to the router.
If yes then you can open the router set up page on that computer.
router set up page is the page where you can check all the router settings.
You will find the wireless network key or password on the set up page of the router.

go to 'Settings'

then 'Reset Settings'

tick 'Phone Settings'

The phone will say its going to reboot......then

after reboot...turn your WIFI on...put in your WEP password...

JOB DONE !...regards to all, Narn

You try this opts
1.You should visit to the nearest Nokia care center
2.Go to phone setting and reset to factory setting.
3.Connect to a pc with usb and format thr phone memory.