Question about Frigidaire Kitchen Ranges
Check breaker in box that it is complexly on and not half tripped. If power source is ok, most likely power surged when it came back on and damaged your control board
Posted on Dec 03, 2018
Just started 6 weeks ago and I've gotten 2 check for a total of $2,200...this is the best decision I made in a long time! "Thank you for giving me this extraordinary opportunity to make extra money from home. This extra cash has changed my life in so many ways, thank you!" Visit site:: SalaryHD.Com
Posted on Dec 03, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
sun, first test is to power the unit down. Find the pair of breakers which are generally 40 or more amperes. Turn them both off and back on. If this doesn't fix it, you will probably need a circuit board.
Posted on Dec 13, 2007
ouch thats gotta hurt!! how about the clock os that back on atleast??? sounds like a bad thermo stat on the back wall of the unit maybe a quater sized thermo 1 wire in one out, should have ( BUT DOUBt it does) have continuity through it. ifthe clock still doenst work ther is also a small inline thermal fuse connected right to the wire warness connecting to the main control
Posted on Apr 03, 2008
SOURCE: frigidaire oven door locked
SOME RANGES ARE DESIGNED TO LOCK IF THE CONTROL SENSES A TEMPERATURE EXTREME. IF THERE IS A FAILURE OF THE SENSOR THAT MAKES THE CONTROL THINK THE TEMP IS UP, IT WILL LOCK THE DOOR TO PREVENT INJURY. REMOVE THE BACK PANEL AND FIND THE OVEN SENSOR LEADS COMING OUT THE BACK OF THE OVEN. DISCONNECT THE SENSOR AND CHECK THE RESISTANCE. AT ROOM TEMP IT SHOULD BE SOMEWHERE AROUND 1084 OHMS. IF IT IS NOT CLOSE,
THE SENSOR IS BAD. PLUG IN A NEW SENSOR AT THAT CONNECTOR AND THE DOOR SHOULD UNLOCK. THEN GET INSIDE THE OVEN, REMOVE THE OLD SENSOR, AND REPLACE IT WITH THE ONE PLUGGED IN.
Posted on Apr 04, 2008
Your f30 problem may be a bad sensor circuit. It may have an open connection or just plain defective sensor. Check the connection between the clock and the sensor as well as disconnect and measure the resistance of the sensor - should be about 1090ohms at room temp (75F)
Posted on Sep 04, 2008
Hi .The oven door will not unlock until it cools down despite the cycle being finished.If it has not opened in a maximum of 1 or 2 hrs then oven sensor failed during self clean cycle and will have to be replaced.Try restarting self clean to unlock door .If not you will have to do the old coat hanger trick or manually move the lock mech. from rear,sensor cost $30-40.Hop this helps .Please rate my response :)
Posted on Dec 13, 2009
Tips for a great answer:
Oct 24, 2013 | Frigidaire FEF336BC Electric Kitchen Range
Jun 25, 2013 | Frigidaire 30" Self-Cleaning Freestanding...
Dec 02, 2011 | Frigidaire PLEF398AC Electric Kitchen...
Feb 17, 2010 | Frigidaire FEF336BC Electric Kitchen Range
Feb 06, 2010 | Frigidaire 30" Self-Cleaning Freestanding...
Jul 23, 2009 | Frigidaire FEF336BC Electric Kitchen Range
Jun 22, 2009 | Frigidaire FEB27S5A Electric Single Oven
Aug 25, 2008 | Frigidaire 30" Self-Cleaning Freestanding...
Dec 20, 2007 | Frigidaire Gallery GLEFM397DS Electric...
Nov 10, 2007 | Frigidaire FEF336BC Electric Kitchen Range
Jul 13, 2019 | Frigidaire Kitchen Ranges
45 people viewed this question
Usually answered in minutes!