I bought a huawei h710vl and they didnt give me frp code is there anything for free i can fix this

Sim unlock code for h710VL Huawei to use any network SIM
here is the direct link to get the unlock code
https://www.unlockninja.com/unlock-huawei+phone

P0193 - Fuel Rail Pressure Sensor A Circuit High Description: The comprehensive component monitor (CCM) monitors the fuel rail pressure (FRP) sensor circuit to the powertrain control module (PCM) for high voltage. The test fails if the voltage exceeds a calibrated limit for a calibrated amount of time during testing. Possible Causes:

• FRP signal short to VREF or VPWR
• FRP signal open
• Damaged FRP sensor

Diagnostic Aids: An FRP signal high condition can be caused by any number of conditions, including a short on FRP signal to VREF, a more positive voltage level, an open FRP signal or signal return. The FRP signal line is pulled up by the PCM and VREF at the sensor, and down by the sensor through SIGRTN. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to Pinpoint Test DD .
Your best bet , take it to a qualified repair shop.

Switch it off then open again

Hi dear Madam, You can use the free guide to bypass FRP lock completely from your huawei device. I figured it out by using this method to one of my friends device and it worked for him. This is the guide to remove FRP from Huawei devices. Bypass Google Account Huawei P10 P10 Plus P9 P8 Lite Mate 9 Honor

code p0191 refers to rail pressure(FRP) sensor--range/performance problem===causes-- wiring-- FRP sensor.
check for air in the fuel system after a filter change
check FRP sensor and wiring is connected properly.

Hi. I searched online on free unlocking solution for Huawei devices. But I couldn't find anything reliable. Most of the free offers were looking to be scam with many negative reviews on them. If you want to unlock your Huawei cell phone safer, you need to spend something for it. For example, you can visit Unlock-Zone.Com and get the accurate unlock code for

You can get unlock code for Huawei Ascend Y201 from the site Unlocking4u.com at low cost and unlock it easily from Telstra Australia network lock.But free Unlock code is not possible to get for this model ,you need to pay to get the unlock code.

Free Unlock codes are not available for Huawei Ascend Y100 (U8185) . But you can get the unlock code for cheap price from Unlocking4u.com . There you have to give your Country and current network name along with your IMEI number to get unlock code.They will give you unlock code along with instruction on how to unlock.Follow the instruction correctly and unlock your mobile.

Hello My Dear:::::


defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000


Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Hi kyawswa81,

I see that you want to unlock you Huawei u8661.

You can use DC Unlocker to unlock you device, click this link to get to the site.

you just need to look for you device model or at least the closest model of your device once you have downloaded the application, you will need to connect you device to the computer while running the application from there it will detect your Huawei device automatically.

Note: some devices require you to have credit to be able to unlock the device itself some devices are free to be unlocked. on the site there should be a link informing which devices can be unlocked for free using the software.

I hope this helps,

mvincentc