I need a manual for cc6363 - Video Cameras

http://www.google.co.nz/search?sourceid=chrome&ie=UTF-8&q=RCA+camcorder+model+%23+CC6363+is+stuck+in+safe+mode+fix

Hi at the above link, you will find a myriad of people with a problem exactly the same as yours, it is a real headache, with NO real, well DIY fix, sorry, it appears that RCA will repair it for a price, so maybe it would be simply best to bite the bullet, and take it to a professional RCA servicing center, but ONLY ask for a "Quote". Now when you get this information, then you can make up your mind as to what to do, repair or replace?
As an aside here, and it is mentioned in that link i give you above, that this problem is a "Known About Issue" and in some countries they have been made to repair this issue FREE of charge to customers...
I actually haven't come across this exact type of problem with this exact type of camcorder, however, in my shop, I have seen similar repairs etc, and they can cost upwards of $200.00, so make sure you always get that quote. Further, there are a few postulated "Fixes" in that site given too, you can not do any real harm in trying any or all of them, especially the one about cleaning the "Heads & tape transport path" as described, this may just work, as may the Battery Removal/Replacement ... so good luck.

rca stuck in safe mode , how to get it out.

E04 - Battery in Safeguard mode.

The most common problem with this kind of model. there actually no fix for this problem. Unless of course your a jvc technician and can manage to open and clean all the sensor inside.

Have you tried to most popular solution for that.. tapping a little bit on the side of that camera. lol.

Look closely with the memory card, make sure it is inserted properly. push it a little more.

You may need to remove the battery from the battery pack and then reinsert again before turning it on. Doing it a few times may help solve the problem.

I do suggest you remove the battery when not in use. Leaving the battery inside is the usual cause for having the E04 when turning it on.

Hope this helps.
Mace1Mace

Hello :

Yes you can . You need to download the driver for your Camera first .

PLEASE DON'T FORGET TO RATE .

good luck .

There should be a S-video out port with most newer tvs support. You may have to go somewhere like Radioshack to get a s-video cable which plugs into the tv. then set your tv inouts to use the s-video port and play away!

Check the tape and make sure the record tab is still on the tape and has not been removed. If the record tab has been removed then use a new tape for recording as the unit will not record. This tap is usually on the lower left end of the back of the tape. When the tap is present it closes a record mode switch letting the system know the tape is able to bv recorded on..

http://www.devicemanuals.com/guide/Digital%20Camcorder/RCA/RCA-Video-VHS-Camcorder-CC6364-User%27s-Guide-TXpFd09EYz.html
You can download the manual by following this link.
Thank you,
Lee

it is possible that the movie format on your camcorder is not one that is recognised by your TV

drivers de la camara jvc GR-DA30U ¿Donde los descargo?

Tell me what to do or do you have a manual for sale.