Question about Onkyo Audio Players & Recorders

Open Question

How to connect digital audio player to onkyo - Onkyo Audio Players & Recorders

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 32 Answers

SOURCE: Digital Audio Input

On many ht receivers you must enter setup mode and tell it which digital input you are using for each digital source. i.e. you can choose optical for the DVD input and coaxial for CD, and vice versa.

Good Luck,
BB

Posted on Jan 06, 2009

Ad
  • 151 Answers

SOURCE: No audio from onkyo receiver

Press the input you want to use,eg sat, then press the digital input button on the front of the amp untill you get sound,then set amp to prologic 2.
Hope this helps.

CABLE GUY.

Posted on Feb 25, 2009

mikelpoynter
  • 77 Answers

SOURCE: How to get non-hd DD or DTS sound from blue-ray on old receivers

It is not necessarily what features you have to look for, it is what connections you need to look for. Most blu ray players have the hdmi ports. On my blue ray I found it and it has the fiber optic end. I have used that and to me it sound just as good.

Posted on Oct 29, 2009

  • 137 Answers

SOURCE: Onkyo TX-SR701 Digital audio port stopped working

you may want to try a factory reset by pressing and holding vcr1 button while pressing the power button. do this with the unit on. It will reset back to factory default. so any saved setting will be lost and you will have to set again to your settings.

Posted on Apr 18, 2010

dunnbiker
  • 8546 Answers

SOURCE: How do I connect my

"R1" is not a unique model. Treat the Cable Box as the high-end source it is. Connect the highest quality audio to the unspecified Onkyo in accordance with its manual.


To avoid the cost and potential problems inherent in unnecessary cables, cable length and interconnects I recommend never running any audio or video signal to or through a component that can't use or IMPROVE it. Hence, in my rig, no video whatsoever goes to my AVR and no high end audio goes to my TV.

Posted on Aug 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant get tv audio through receiver directly (without satallite, Game, DVD connection)


If your TV doesn't support audio return channel (ARC, which is your TV audio routed back to the receiver through the same HDMI cable), you then need to connect your television audio-out to your Onkyo TV audio input, using a digital cable or an analog one according to the connections on the back of your TV. If you use a digital connection (optical or coaxial), make sure you have the proper digital port assigned to TV on the onkyo I/O assign menu/digital inputs.
In case your TV does support ARC, you need to activate it in the Onkyo's hardware/HDMI setup menu, either by turning on HDMI control (tv or receiver control each other via cable), or by turning ARC on (you'd probably need to activate ARC on your TV as well).
Hope this help,
M G

Jan 03, 2013 | Onkyo TX-NR609

1 Answer

Onkyo HT-S3400 not showing DTS-HD Master Audio


Hello, with the source playing press the display button on the remote. What format do you see? Thank you, CB

Apr 05, 2017 | Onkyo 5.1-Channel Home Theater Package...

1 Answer

How and am i able to connect a hdmi dvd player to


You don't.

Use whatever digital or analog audio outputs and S-video or composite video outputs that are provided on your source devices.

Feb 27, 2010 | Onkyo TX-SR500 Receiver

1 Answer

How do I connect a sony BDP-s350 blue ray player to a onkyo tx-sr803 7.1 receiver with the hdmi cable?


Connect HDMI cable from the rear panel of the blu ray player to the DVD/IN digital section, labeled as "HDMI/IN" on the rear panel of the receiver.

Jan 01, 2010 | Onkyo TX-SR803 Receiver

1 Answer

Trying to connect cable box....


You should be able to pick any open audio device unless it says pre-amp only. If your manual shows a connection for a CD player or similar device it should support the cable box.

Good luck and thanks for using FixYa

Mar 17, 2009 | Onkyo TX-SR500 Receiver

1 Answer

Onkyo TX-SR606 getting no sound from HDMI sources on speakers. I have a motorola cable box and a panasonic DMP BD-35K blueray player both attached to the SR606 via HDMI cables (HDMI3 and 1 respectively)...


Not sure if this is your fix, but I had what I thought was the same problem. I played with my Onkyo quite a bit ensuring the correct assignments for HDMI, audio and all that stuff. Turns out I neglected to make sure the output devices were properly assigned. Many devices aren't default to output sound over HDMI. I changed the audio out settings on the cable box to HDMI and suddenly the Onkyo worked great. I know, I'm an idiot for not checking that in the first place, but maybe someone out there is having the same trouble as well.

Feb 20, 2009 | Onkyo TX-SR606 Receiver

1 Answer

What Blu Ray to buy for ONKYO TX-NR801 for Dolby TrueHD, etc???


Hi, as the Onkyo receiver you have does not have HDMI switching, the only thing it will do for you with a Blu-Ray player is process the audio signals.  The video from the BR player will have to go directly to an HDMI input of your hi def TV.  In this case, either Sony or Panasonic BR player will be equal.  Assuming you keep the Onkyo unit you have, you would want to use the optical digital output from the BR player as the audio source into one of the optical, digital audio inputs on the Onkyo.  In an ideal world, your receiver would some that does do HDMI switching.  This way, all the audio and video signals from any audio or video source would be automatically switched and channeled through 1 simple HDMI cable into your hi def TV.  This will make you life simpler as ther would be no need to select an appropriate input on the TV, as well as one on the receiver.  That said, buying a new receiver in addition to a BR player is more costly.  Good luck.  Let us know how it goes.

Jan 02, 2009 | Onkyo TX-NR801 Receiver

2 Answers

No 5.1 audio


Make sure that the digital audio cable from the DVD player is properly connected to the unit, then step through the Onkyo menus and ensure that the digital connection you used for the DVD player is properly associated with the DVD player's video input.

Jan 02, 2008 | Onkyo TX-DS777

1 Answer

Audio connections between Onkyo TX-DS575 and Sony DVD DVP-NS77H


If you are using digital optical or digital coaial and getting sound on regular 5.1 dvd's your conections are fine. With sony players you have to get into the setup menu and turn DTS "ON" in the audio sub-menu. For some reason they default it to "off".

Dec 17, 2007 | Onkyo TX-DS575 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Ted28

Level 1 Expert

5 Answers

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76099 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...