Set time on my Ironman wattch - Ironman Watches

Hi,

Here is the link that can help you set up your watch. Also here is the All list of timex watch downloadable instruction.

I hope this can help you resolve your issue.

Thank you for choosing Fixya

Follow this link: http://assets.timex.com/user_guides/W148_M851/W148_M851_NA_EN.pdf Follow instructions and your watch should work properly.

Hi ianloggie,

Goto this link and select the model of your watch to download instructions on setting time...http://www.timex.com/info/Product_Instruction_Guides_Downloads


please vote and rate me if i solved your problem :)

Regards,
Salman

Hi hdirkse,

To set the digital time and date on your Timex Ironman, please follow the steps below.

1. press and hold the "set" button for two seconds.

2. Use the "advance" button to reach the correct hour.

3. Press the "mode" button, followed by the "advance" button to set the minutes on your Timex Ironman.

4. Repeat the procedure of pressing the "mode" and "advance" buttons to set the month, date, year and day of week.

5. When you are finished setting the time and date, press the "set" button to save.

Setting an Alarm

1. Begin by pressing the "mode" button until the alarm screen appears.

2. Press the "set" button and use the "advance" button to set the hour for your alarm.

3. Repeat the same procedure to set minutes and seconds for your alarm.

4. When you have finished setting the alarm, press the "set" button, followed by "advance" save and activate your alarm.

5. When you alarm sounds, you can deactivate it by pressing any button on the watch.

Hope it helps.

Thank you for using FixYa.

You can get instructions from the Timex web site "timex.com".

At the bottom of the screen click on "manuals/downloads", then on "product
manual download"

Enter your watch type in the search box and click on "search"

Check for my TIPS on this site and you will find manuals/instructions for all TIMEX watches.

First look for the set button then press it ,a long press and If it is blinking that's the time you to select the hour ,the minutes,the day/date,the alarms and the special features of your watch.The right button the up and down or for scrolling.Try all of this so your time will set.

Hope it may help you;

Regards;
VOTIT

Press & hold set button the seconds will flash.

Press split/reset to set seconds to zero

Press mode to select hours

Press split reset to advance hour digits go through 12 hours to get to AM/PM

Press mode to select minutes


Press split reset to advance minutes

Keep repeatin the above steps to set month date day and 12/24 hour diplay

Press set when done.

Since you have changed to the newest program I cannot get in the watch program I was using to set the watch. Please help.

Hi catlady05,

To set the digital time and date on your Timex Ironman, please follow the steps below.

1. press and hold the "set" button for two seconds.

2. Use the "advance" button to reach the correct hour.

3. Press the "mode" button, followed by the "advance" button to set the minutes on your Timex Ironman.

4. Repeat the procedure of pressing the "mode" and "advance" buttons to set the month, date, year and day of week.

5. When you are finished setting the time and date, press the "set" button to save.

Setting an Alarm

1. Begin by pressing the "mode" button until the alarm screen appears.

2. Press the "set" button and use the "advance" button to set the hour for your alarm.

3. Repeat the same procedure to set minutes and seconds for your alarm.

4. When you have finished setting the alarm, press the "set" button, followed by "advance" save and activate your alarm.

5. When you alarm sounds, you can deactivate it by pressing any button on the watch.

Hope it helps.

Thank you for using FixYa.