SOURCE: door panels for frigidaire dishwashers
sure its possible,stainless steel door 154538305 approx $100
SOURCE: Whirlpool DU1100XTPS dishwasher leaking from front door panel
Hi karen_kinzer,
I'm Harvey the Master Plumber.
The d/w was a recent purchase?
Then my advise to you is don't worry about it! The unit should be under warranty. It's time to make the call. Let the warranty repairman worry about it. If he can't fix it, he has the authority to condemn it and you'll get a new one. Anyway, this is one problem you should not have to worry about.
Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber
SOURCE: Kitchenaid Dishwasher door wont latch
I have a brand new whisper quiet dishwasher model kudk02crbs4 I hook everthing up but the door does not lock what is worng I have no clue what wrong
SOURCE: How do I replace the door latch on my dishwasher?
Don't try to bend anything! The latch mechanism in the door is probably broken. Open the door and remove the 11 torx screws holding the inner panel on. You will probably find broken plastic bits on the pathetically flimsy latch; mine failed after 4 years and I expect it to happen again.
If you do, see the link given in "I Have 3 problems with my dishwasher, my...",
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5168615&diagram_id=1349844#d1349844 Unlatch the two switches and slide them off the old part and onto the new one, observing all the obvious precautions about not getting shocked and putting the switchess on correctly. Reassemble the door and latch with the screws.
SOURCE: kenmore elite dishwasher stopped in middle of cycle
Here's your solution (free PDF) - Kenmore Elite Dishwasher Manual
Hey friend, thank you for your post!
From what you have described your Frigidaire dishwasher, FDB510CFS0, will start operating. This could be a possible issue with your control panel or door latch. If you door is not latching properly then it is not sending the appropriate signals to your control panel. This could cause an error code to populate. I would recommend performing a reset on your dishwasher and you can do that by disconnecting power from it for roughly ten minutes. Hopefully this is helpful to some degree. -Matt
179 views
Usually answered in minutes!
×