My Kyocera 181 is not printing it diplsplays print mode error and is not printing

Doesn't like your paper size?

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00L4-91KewA3vebAYh7Dj9eIe5b7A%3A1610830848662&ei=AFQDYMLlJ4uz5NoP-YqVwAc&q=kyocera+print+mode+error

Google

make model manual

look at the troubleshooting section or use CTRL+F and type 'print mode error', press enter.
..

press print key and see what the error is

It is usually because you have the machine set up as A4 and the your documents or printer driver set to 81/2 X11(American letter size) size paper ,to override this ,got to the menu system button in the top left of the operation panel ,scroll down to printer setting in one of those menues you'll find A4/letter override turn it on and you'll get rid of the problem .

Print Mode Error is Chenglish for a problem with printing. Press the Print key at the left side of the panel, then the display should tell you to add paper etc

change print driver, make sure you use kx driver and not xps driver, also under device settings make sure you change it to pcl xl.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

I have a kyocera 181 copier when we switch on the machine it showing error message " shake the toner container' kindly do the needful or send me service manual as soon as possible
I am awaiting for valuable response....

print mode error is as a result of the size of paper not matching with paper in the cassette. When printing go to properties and select A4 before sending your print job

Pls. send Free service manual with code for kyocera TASKalfa 180.
My email [email protected]

Especially interisuet off hibernation.

when this error comes up..hit the print button on the left hand side..this will than tell you on the screen wha the actual problem is..i.e ( out of paper...lost connection etc

try setting the driver to KPDL mode in the settings section of the driver