How do I work my scanner? - Canon PIXMA MP190 All-In-One InkJet Printer

When you replace your latest Windows OS or any other version of the software, your system may not recognize the scanner at times, or confusing messages may occur while scanning anything. At HP Chat Support, our skilled tech-specialists are available to help you resolve your issue quickly and easily. It becomes difficult for the user to determine the root cause of the scanner not working problem.

How to Fix an HP Scanner That Isn't Working

Here are a few methods that may assist you in resolving your HP Scanner not Working. You don't have to test them all if one of them solves the problem; simply work your way down the list one by one.

How To Fix HP Scanner Not Working Issues?

While scanning with the HP scanner, users may face issues. HP scanners, like any other machine, might develop technical problems. These issues can cause your HP scanner to stop working properly. Most of the time, you can easily fix HP scanner not working issues on your own.

For more information, Contact HP Customer Care Support.

If this guide does not resolve your scanner's issue, you may also contact the HP Scanner Support Center via their official website.

Please try this!!
You may need a soft or hard reset. Here's some reading and instructions.
Please use this first!
resetting your scanner
1. Turn off your scanner, and then turn it on again.

2. Insert a pointed object into the reset hole on the back
of the scanner. Then, gently press and release the reset
button. Pressing reset does not clear the scanner's
working memory or the V-Scanner folders.

If this doesn't work here's step two! CAUTION. THIS WILL ERASE EVERYTHING, but it MAY Fix the Problem!!

Initializing your scanner clears all information stored in your
scanner's working memory. Initialize your scanner only when
you are sure it is not working properly. V-Scanner memory is
not affected when you initialize the scanner.

1. Turn off the scanner, and turn it on again. First, the DSP
boot version, and then Welcome To Digital Trunking appears.

2. Press 0. The following messages appear on the display:

System Tests

Select Test
Exits if no
Key Press

3. Press 1. The following messages appear on the display:

Factory Init
Erase Memory
ENTER if Yes
CL to EXIT

4. Press ENT. The following messages appear on the display:

Initializing
Clr Main Mem
V-Scan is OK
Please Wait

5. Do not turn off your scanner until the initialization is
complete. When the initialization is complete, M000 and
Bank 0 Ch 00 appear on the display.

Hope this works.. Happy Scanning

Please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts
jay uth

I can not find driver suitable for scanner CP-HR7X to work in Windows 7 too. I am from Russia.

Cannot scan  on IMac with Epson Stylus CX3900?

Your OS is not compatible. Period. Either go back to what worked for you or get a new scanner that will work in new environment.

I purchased Canon DR 9080C scanner two years back but the CapturePerfect 3 not received. So speed is slow. Can Canon Big help me to provide capture perfect 3 software. My email is [email protected]

scanner is not working

When I had the cable that came with the printer connected to the scanner, and the cable that came with the scanner connected to the printer, the scanner didn't work.

Changing the cables changed everything.

hello the scanner wount evevn do enything


im so angry