Wireless connect to a ipad - Computers & Internet

an iPad with WIFI only will do as you have wireless connectivity:
Apple unveils iPad Mini with Retina display A7 SoC priced at 400...

1. Start the iPad
2. Tap on the Settings app
3. Tap on the Wi-Fi category
4. Choose a Network
5. Once you Tap on a network name, it will try to connect to it. If the network is using wireless encryption, though, you will be presented with a screen asking you to enter the wireless encryption password.

How to connect an iPad to Wireless or Wi Fi network

what type printer do you have? you need a wireless router.
connect the printer to your wireless router via ethernet cable or wireless. after setup is done.connect the ipad to the same wireless router...navigate to printable material from the iPad, safari is easy just launch it.click the arrow in the top left corner of the iPad, print should be an option, click print.if you do not see you printers name thenyou should then see add printer, click itif the printer is setup correctly and is "air print" capable (wireless printing) you should see it as an available printer. its simple---- I wish this site did not suck so bad with uploading videos I would show you step for step.... more questions just ask

Do you have any other wireless computer or device in the network?
Can you connect to the wireless network on any other wireless computer or device?

Try changing wireless channel on the router.
Make sure that SSID broadcast is enabled.

How to connect to the wireless network on iPad

I think you should check the wireless settings of the router netgear router and the iPad .
Do you have any other wireless computer or device in the network?
Can you connect any other computer or device to the wireless network?

If your wireless network is secured then make sure that you have the correct network key.

See the links below:

Netgear router setup

How to connect iPad to Wireless network

See how to connect Ipad to wireless network

If your Linksys wireless router is already setup with a wireless network, do the following to connect the ipad to the network:

Tap the Settings icon on the home screen of the iPad. Go to General, then Wifi. Once in the wifi section, you should see available wireless networks. Choose the network that is setup on the Linksys and connect to it. Enter the password if you have one set on the wireless network and tap join.

If your linksys is not setup with a wireless network, consult the manual for it to configure it properly.

If you want to use the same connection from at&t ..you have to download and install the AT&T communication manager for windows & ..and after that make the connection ..
Here is the link ..
http://www.wireless.att.com/businesscenter/solutions/wireless-laptop/communication-manager/index.jsp
If you have the AT&T on a wireless router ..use the wifi .card to connect to the router ...by ..enabling the wifi ..than click on the card icon ..and scan for networks ....When the router is found by name ...click connect ..and thats all..

usually with the IPAD. You need to put the correct settings into the wireless connection settings.
You wll need your SSID (the name your router shows up as when you search for wireless connections)
Your security type ( WEP or WPA/WPA2)
your wifi password.
I have connected many IPADS, as long as you have the correct details it should work
Are you setting the correct security type?

in your apple ipad switch on your wireless and search for the available networks you can find your router name just click that it will ask for the wep key its nothing but your wireless password you need to enter that then it will connect automatically