Canon i860 error code 5200?

Here what I found for you. If it fixes your issue, don't forget to give me a good rate. Thanks
Print head temperature rise error or Error Code 5200
Condition: The print head temperature exceeded the specified value.
Problems and Solutions:

• Turn off the printer and then turn on if error still persist replace Ink cartridge or print head thankyou for using

Hi there

Service error code 5200 is the print head error. Rub the print head into a plain paper with rubbing alcohol until ink flows and then after that remove all the USB cable connection and power cord and plug it again. Then run the print head cleaning maintenance like print nozzle or print alignment.

It should be fine right now. Please let me know if you need more help

it means Print head temperature rise error or Error Code 5200
Condition: The print head temperature exceeded the specified value.
Problems and Solutions:

• Turn off the printer and then turn on if error still persist replace Ink cartridge or print head

Visit:
[url]http://pcmediks.blogspot.com[/url]

the error code 5200 means:

1. an abnormal printhead temperature, the temperaure exceed the spicified value.
2. the solution is change the print head or the logic board.

Canon printer error code 5200 is a technological malfunction that stops printing of a canon printer. The error is registered on the screen when the temperature of the ink cartridge is high. There are no concentrations of ink present on the ink cartridges. The print head of the printer is also heated by a temperature rise resulting in an error code of 5200. Canon Printer Error 5200 Few troubleshooting steps are explained below. These troubleshooting steps are so basic that they can be performed by anybody with enough guidance. But if, in any case, someone is unable to comprehend these troubleshooting acts, assistance from trained experts is needed.

Canon printer error code 5200 is largely due to cartridge problems. This can be due to a low amount of ink in your cartridge, a faulty cartridge, or maybe there are some flaws with the logic board of your printer. We realize that Canon printers are designed to be printed in black, even if the Black cartridge is empty, using colors in the ink cartridge. Thus, if you see a mistake of 5200 in the Canon printer, the printer cartridges are either empty or near to empty. Now that you know the root of the error, let's talk about the solutions.

Our Services: You may find that the Canon printer error code 5200 has been deleted after the above information has been completed. But if you still get the same error code on your computer screen when printing, you can contact Our Printer Error Specialist now.

Check given blog.

According to the error code, http://pixma.ulmb.com/?p=226, the error #5200 means "Print head temperature rise error".

Some of the nozzles of your printer are clogged. The print head will overheat because it does not have ink going through the nozzles to cool it. But you continued to print repeatedly, the print head may have been destroyed due to overheating.

Error 5200 is a print head temperature rise error according to the Service Manual. The suggested replacement parts are the print head and/or the logic board - Expensive. It's supposed to be accompanied by 8 alternate cycles of the orange and green lights.
Page 1-5 of the Service Manual.
excessive cleaning cycles can cause heat buildup, but it should cool between jobs with enough time.

ok and error 5200 ushally means it has something to do with the printhead but we are going to try this just because it is the easyest and known fix for this error.

First off unplug the printer from the computer
secound turn the printer off
third unplug the printer from the wall
wait a minute
plug the printer into the computer then into the wall then turn the printer on
do a test print

This should have solved your problem but if it didnt please let me know and I will see what other things we can try to help you fix this issue.

Have a look at the yellow cartridge. I have had trouble with inks leaking into each other...most noticeable in the yellow. I have no solution...perhaps the printhead is a piece of ****...works well when it works.

Print head temperature rise [5200]

I would assume that the cleaning efforts resulted in oveheating the print heads.

Please ensure that you have sufficient ink, as ink acts as a lubricant for the heads.If you try to use them while empty it is equivalent to driving a car without oil.

Take your time..
Verify ink is in all cartridges.
Remove paper jam
let the printer cool off (heads)

Chances are the head alignment is not necessary and you are low on one of the inks...

Try this test program (Page) to isolate low colors...

http://www2.clicshop.com/Stores/metawatch2/Files/metawatchprintertestpage.pdf