Where on the menu button do i have to change to enable me to see how many photos i have taken

Make sure there isn't a button lock feature on your camera to protect against accidentally changing a setting.

If you cannot delete photos individually you may have the image protection feature enabled.

Hello and welcome to FixYa!
This following steps allows you to set the system time which will be displayed on the photos.

• Press the Up or Down buttons to select the Date option in the Setup menu.
• Press the OK MENU button.
• Press the Up or Down buttons to select a Date option from the menu that appears

On selecting "On" the date will appear on the photo once it is taken.
On selecting "Off" no date will appear on the photo.
On selecting "Set Date" the Set Date settings screen will appear. You will be able to change the date settings that will appear on the photo once it is taken.
To Set the date:

• Press the Up or Down button to enter the Set Date option.
• Press the OK MENU button.
• Press the Right/Left button to select and highlight the Year, Month, Day, Hour, Minute, Second and Date Format type.
• Press the Up or Down button to set the Date and Time digits.
• Select the first option of the Date format and press the Up or Down button to set the date format that appears on the top line: YY MM DD; DD MM YY; MM DD YY.

• Press the OK MENU button to confirm, save the changes and exit.

You have done it.
I hope this solution helps you
If you have any more query or issue regarding your problem do inform me.
Thank you for using FixYa!

The "wrench" is NOT a button, it is an icon in the menu.

Press the MENU button. Press the Right/Left button to select the "WRENCH" icon The Setup menu appears in the center of the LCD. 3. Press the Up/Down buttons to select the Date option in the Setup menu. Press the MENU button. Press the Up/Down buttons to select a Date option from the Menu that appears: On selecting "On" the date will appear on the photo once it is taken. • On selecting "Off" no date will appear on the photo. • On selecting "Set Date" the Set Date settings screen will appear. You will be able to • change the date settings that will appear on the photo once it is taken. To Set the date: Press the Up/Down button to enter Set date option. 1. Press the MENU button. 2. Press the Right/Left button to select and highlight the Year, Month, Day, Hour, Minute, 3. Second and Date Format type. Press the Up/Down button to set the Date, time and format

The "wrench" is NOT a button, it is an icon in the menu.

Press the MENU button. Press the Right/Left button to select the "WRENCH" icon The Setup menu appears in the center of the LCD. 3. Press the Up/Down buttons to select the Date option in the Setup menu. Press the MENU button. Press the Up/Down buttons to select a Date option from the Menu that appears: On selecting "On" the date will appear on the photo once it is taken. • On selecting "Off" no date will appear on the photo. • On selecting "Set Date" the Set Date settings screen will appear. You will be able to • change the date settings that will appear on the photo once it is taken. To Set the date: Press the Up/Down button to enter Set date option. 1. Press the MENU button. 2. Press the Right/Left button to select and highlight the Year, Month, Day, Hour, Minute, 3. Second and Date Format type. Press the Up/Down button to set the Date, time and

Hi,

Press the MENU button to bring up the Record mode Menu. You can use this shortcut menu to quickly change image resolution, reset all settings to factor defaults, enter Panorama mode, enable Picture+Sounds, enable Silent mode, change the scene mode (when set to the SCN position on the mode dial) as well as enter the Setup menu.

Hope this helps.

While in Postcard Print mode, use the Menu button to navigate to the Date Stamp section in the Rec Menu.
Select [Off], [Date] or [Date & Time] then select 'Off'.
Press the Menu button again to get back to shooting mode.

Hi!
Have you tried pushing the button first under the mode dial? It changes view mode, just above the MENU button?

Tom

here is the solution:
The date and time can be included on the pictures taken only with the camera in postcard mode. You must also activate the date stamp option in the menu.
To set the camera into postcard mode, press the [Func.] button on the camera, then use the [arrow down] key to go down to the last option in the menu, and there you can choose the [Postcard mode]. Press [Func.] again to exit the function menu.

To set the date and time stamp, press the [Menu] button and then use the [arrow down] button to go to the [Date stamp] option in the menu. You can set this to "Date" or "Date & Time". Press the [Menu] button again to exit the menu.

your date and time are set now
congratulations!
Rate this answer if it is working with you
thank you
with all my best regards
[email protected]

In order to turn on Live View, first put the camera in one of the Creative Zone modes (i.e. P, Tv, Av, M or A-DEP). Then press the menu button, and scroll to the second settings menu (the second wrench-symbol), then scroll down to "Live View function settings" and press the SET-button. Then scroll to "Live view shoot", press SET, scroll to "Enable", and press set again. Close the menu by pressing the menu button twice.
Now you can turn on and off the live view on the LCD by pressing the SET-button.
/Chris

press the "Menu Set" button while the camera is on regular camera mode. There should be a menu that comes up... go to "Pict.Size," press the right arrow... then choose :)