At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, The best way to recover deleted photos from memory card is by using a recovery software which will be a wise choice. But choosing is difficult. The tool must recovers almost all kinds of image files available in the technological world. A tool with such capacity is linked her .It owed me a very good output results for my Olympus e30 model. Go for the demo version of the tool if succeeded purchase the full version of it as i did...
You could try use the Windows XP SuperScript 870 driver or you could install the HP LaserJet III printer driver. It should work with your printer, but may have limited functionality.
Subject: Rechargeable Portable Blender Model No. 850-870
I was given one of these blenders for Christmas. I charged it through 3 cycles, used it once and the battery was dead. Charged it through another 5 charge cycles and used it once only to then have another dead battery. I have put it through at least another 8 charge cycles, and it indicates a DEAD battery. I have managed to blend two (2) 3/4 full pitchers in total. On trying to start it now the green light 'flickers' quickly on and shuts down.
This is a totally useless device.
I would like to return it for a full refund, including shipping.
Unfortunately, the Russian software does not work on a Mac, and it crashes at launch when installed in WZ98 under Virtual PC. However, I found this on another site, and it worked immediately: The sequence to reset the waste ink counter is as follows:
WASTE INK ROM RESET ONLY 870, 1270
1. Turn the printer off using the power button on the panel of the printer. 2. Disconnect the interface cable at the back of the printer. 3. Hold down the "LOAD/EJECT" and "CLEANING" buttons simultaneously. 4. Turn the printer on. Release all buttons as soon as paper out light flashes. 5. Quickly press (within 3 seconds while PAPER OUT light is flashing) the "CLEANING" button for 10 seconds. 6. Release the button and the printer will initialize. 7. Once initialization is complete, turn the printer off. 8. Reconnect the interface cable. 9. Turn the printer on
×