Tv screen is completely white and I can only hear audio , how to fix this problem?

1. Unplug your TV's power cord from all of the power outlets.
2. Hold the power button on the side of the TV down for about 3 to 5 seconds.
3. Then plug the TV's power cord back in the power outlet again and turn your the TV.

i have white screen on this tv no matter which input it could be on cable /tv or hdmi, dvd,etc tv stays on white screen but audio is good.. how do i fix this??? the tv dont show channels changes or setup when using control just a blank white screen.

hardware problem, better to buy a new one instead of fix it.

Hi,
Please few things...
1- Make sure audio and video wires are hooked correctly in AV input of tv and you selected that AV input in tv with its remote.
2- Also check your dvd has not been set on progressive mode if you hook dvd player through yellow-red-white wires with tv.
3- if dvd player is set on progressive mode, then hook it with tv by component video input, red-green-blue for video and red-white for audio.
Hope this info will solve your problem.
Thanks.

Your TV requires repairs. Service can be obtained by calling 1-888-237-8289 in the U.S. or 1-866-237-8289 in Canada. If your product is within the factory warranty period, your repairs should be completed at no expense.

Ur tv LCD inverter board it dead.Replaced it u get ur picture back.

I found my product manual and called the Tech Support line. They said it was a problem with the display and would have to schedule and appointment to fix it.

You could sell it to me or pay me to fix it but I am not that mean:)
Ok so the system is on standbye and the red lights on.... push down the power and hold for sec.. dont let go as soon as u push it... you will hear a beep then it will reset itself and you should have video.. I know this works as I have fixed 4 ps3 THIS WEEK doing this!

What is the camera model?

try to trouble shoot if the wire is the problem, how? remove the 3 colored wires from the tv and ps2 then try to use the red color instead of yellow to the video from tv and ps2 (both red) temporarily do not use the yellow color. once a picture appears use now the white for the audio (both white) for left audio once there is a sound you may try the yellow for the right audio. i hope this will help you and hear a positve reply from you.