Trying to pair a 1Mii Bluetooth transmitter with Sol Republic Shadow ear buds. Both devices are in pairing mode, but don't seem to connect. I have done a factory reset on the Shadow.

SOURCE: HOW DO I PAIR A MOTOROLA n136 TO A LG VX5400

follow the steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’
7) If successful then the headset will start flashing BLUE every few seconds.
• The headset is now paired with the phone

Hope this helps
Season's Greetings from Fixya!

Chris (ziraffa)

SOURCE: Trying to pair omnitech 2.0 bluetooth headset without manual

before attempting to pair your headset with another device, be sure that the bluetooth headset is in the off position

• press and hold MFB until indicator light flashes blue and red. The headset will also beep twice
• to pair your device to the bluetooth headset use the bluetooth pairing instructions from you device's instrucition manual.
• input ID code 0000 when requested by the device
• the headset and device are paired correctly when the blue and red indicator light flashes blue only.

SOURCE: bluetooth "device out of range or powered off"

I had lots of trouble too. I thought it was my phone. Well here's what you do. First off remove the device completely from your phone. Turn off the phone and take the battery off so it can re-boot. When the phone is powered back up put your bluetooth in pairing mode and get it back on your phone. It should connect without any problems. Now....here is the trick. When you want to disconnect the device(bluetooth) from your phone don't turn it off on your phone. Shut the actual power off on your bluetooth. The phone will recognize this and disconnect the device. The only thing left on your phone will be the bluetooth icon. Being the icon still on your phone it is still in discovery mode and can overtime use up your battery life searching for a device. This is when you can go to your phone and turn off the bluetooth. On your NV 2 go to your bluetooth menu and just use your left softkeyto turn it off. Now there is no connection whatsoever. And to turn it back on do the opposite. Go to your bluetooth menu and turn on your bluetooth. You will see the bluetooth icon. Now you power up the bluetooth and it will connect as soon as it get the signal. This took me 2 weeks of trial and error and other stuff but I am happy now and I hope this solves any bluetooth problems...

SOURCE: Light won't stay purple even when boom closed & button held

Depending on the phone... try and remove the current bluetooth device, if there is any. Close the headset. Go to the phone and choose discover, or search. Open the headset and press and hold the big button. It should then turn purple and should be recognized.
The boom should be open when you press the button.

Also make sure the battery on theheadset is charged before doing this.

The passkey will be 0000, four zeros.

SOURCE: how to find my passkey on my HP Integrated Module

Passkey is 0000