Why wont the bt option on my 626b power acoustik stereo open or turn on

Running straight power from the battery suggests there's another option, as for instance running mains power...

How could having two ground wires work, please?

POWER ACOUSTIK PTID-3265S CD/MP3/USB/DVD 3.2" TV STEREO SCREEN & 6.5" SPEAKERS

Is your gain turned up on the amp????? Is you preout turned on in the settings on your stereo????? Maybe temporarily run an extra rca cable to see if thats the problem.......Are you running one sub or two????? Did the amp work before?????

hey i have the same problem did you ever get yours to work if so how did you get it to work ??????????

There is a short or wires are touching, Then again it could be because the remote(Blue wire) From amp to stereo which tells it to turn on and off has been connected to the wrong wire and is not working effectively.
Check for any shorts check all wires from both ends it shouldn't take long and make sure no wires are even slightly touching.

just had the same problem-it does not come with the stereo or even the DTV1 box, it only comes with the NAV1 unit. Luckily I found a local stereo shop that sold me one out of ther NAV1 box since I only bought the DTV1 box with the stereo and I needed it. So hopefully you will have teh same luck , either that or you will have to buy it directly from Power Acoustik.

Hello, your problem is that your amp is rated at 4 ohms bridged mono ans 2 ohms stereo. If your running it in stereo you need to raise the ohms to 2 ohms a channel and if your running it bridged into 1 channel you need to be running it at 4 ohms. Please rate this solution please so I can prgress on FixYa.com. Thanks!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/mark_b53a7494531bf96d

in the USA that is ilegal but if you wanted some of my colleagues put the parking cable of the stereo to ground.Good luck

email me at [email protected].