What does F3E0 mean on my baumatic oven - Baumatic Ovens

Check the elements for continuity. Some ovens will do strange things if one element fails due to shared returns.

https://www.google.com/search?q=baumatic+bt2750ss+checking+element

..

Question moved from Misc.

The model number is BA 'oh' and not BA 'zero'. Contact the Customer Care department direct. You are right, no manual online but there is this one, the BAO6009

Baumatic BAO6009-P Instruction Manual - Oven - ManualsLib

https://www.manualslib.com > ... > Oven > BAO6009-P
View and Download Baumatic BAO6009-P instruction manual online. ... (34 pages). Oven Baumatic BAU91GG Operating And Installation Instructions. (24 pages). .

Customer Care

https://www.baumatic.com.au/commercial/customer-care

..

next time you see the error codes, write them down. F3E0 is open sensor error . I don't think you have an oven sensor error or a problem with the sensor. When the oven works the temperatures are good so the sensor won't be open. F0E0 is "No Error" and "No Action Required". It sounds like a loose or a bad connection in the control section. There is no connection between the oven door and the control panel. Opening and closing the door to clear error codes or to get the oven to work is jarring the control and the loose or bad connection to the point it makes contact and works. Start with the ribbon connector and remove and reinsert it. You can also use a pencil eraser to gently clean the end of the ribbon connector. Remove and reinstall the wire harness connectors on the boards. Make sure all the pins in the connector are in place and not starting to come out the back of the connector.

Here are a few possibilities. You can also try customer service at the store or manufacturer.



Baumatic B906SS Fanned Built in Electric Double Oven Stainless Steel B906SS

Baumatic Oven manuals

Redirect Notice

http://www.appliancepartspros.com/repairtips/repairtips_appliance+fault+codes.aspx#Whirlpool Range / Stove / Oven Fault Codes

this website gives the problem code what it means and the soulution
It may help you

If the oven is electrically heated, then more than likely, the oven element has failed.

This is located behind a removeable cover at the rear of the oven.

whilst the fan is running the heating element which is usually in parallel with it should heat.. This usually means a faulty element..

The oven cabinet is likely built for several different models, which means that the case could have been built with an extra hole or two that aren't used on your model. This a normal manufacturing technique for mass-product factories. I see from the Baumatic website that several of their models do use a meat thermometer probe, but even if you bought a probe you couldn't use it your oven. Your model doesn't have the correct circuit board and control panel that the oven needs to use the probe. In any case, if you need to order parts from the manufacturer or would like a downloadable Owners Manual for your model, they are available at this website link: http://www.baumatic.co.uk/products/discontinued-models/builtinovens/B185SS-B Hope that helps! ;)