Need bowl lid for toastmaster 1 1/2 cup mini food chopper model TM-61MC

You can try ebay:
Toastmaster Chopster Mini Food Chopper Replacement Work Bowl Lid Cover Top...
or you can try at sears.com

Help! My Cuisinart is Stuck! - Chowhound

www.chowhound.com/post/cuisinart-stuck-353459

Dec 21, 2006 - Read the Help! My Cuisinart is Stuck! discussion from the Chowhound food community. ... The lid seems stuck and won't come off. I've tried pressing down,... Make sure all the buttons are in the neutral position. Reply ... In case of clarification- Turn the lid back on before unlocking, then twist off. Reply.

How to remove a stuck Kitchenaid Food Processor Blade (blade in ...

https://answers.yahoo.com/question/index?qid...

Aug 25, 2009 - Now the blade in the smaller bowl (4 cup) does not come off the bowl.... UNless i take out the 4 cup bowl blade, it doesnt allow me to remove the bowl ... I've used the screwdriver method for years in my shop with nearly 100% ...

https://www.partstore.com/Content/.../Appliances-Food-Processors

They may have it. They are other website that claim to carry parts for your brand, also.

just an ideah here try looking at the goodwill stores i see food choppers there all the time also maybe salvation army

You need to replace either the bowl or the lid. Either the lid is not pushing the bowl mechanisms far enough or there is too much lost movement in the bowl part.

Probably the mechanisms in either the bowl or the parts of the lid that engage the bowl mechanisms.

searspartsdirect.com

The Kitchenaid food processors have a few safety features implimented. If the unit is not assembled properly, this may prevent the unit from turning on. I am thinking this is an issue of assembly because the light is on, so the unit is definitely getting power.

Proper assembly is below:

If it isn't all ready, please disassemble the entire unit. This means removing the blade and/or disc, blade, removing work bowl, work bowl lid, and blade.

Start by placing the work bowl onto the motor base. The work bowl handle should be facing at 9 o'clock, which is out to your left. Rotate the handle downward until it locks in at the 6 o'clock position, which will lock over the center of the button panel.

Repeat the process with the work bowl lid. The blade does not need to be present for the motor to engage, if this is an assembly issue.

The Kitchenaid food choppers have a few safety features implimented. If the unit is not assembled properly, this may prevent the unit from turning on. Proper assembly is below:

If it isn't all ready, please disassemble the entire unit. This means removing work bowl, work bowl lid, and blade.

Start by placing the work bowl onto the motor base. The work bowl handle should be facing at 9 o'clock, which is out to your left. Rotate the handle downward until it locks in at the 6 o'clock position, which will lock over the center of the button panel.

Repeat the process with the work bowl lid. The blade does not need to be present for the motor to engage, if this is an assembly issue.

KFC3100 Manual is posted at http://www.kitchenaid.com/assets/pdfs/product/ZUSECARE/9705624.pdf