Sorry, but that's not very specific.
Most USB memory sticks (aka thumbdrives) are "plug-and-play." Meaning you stick them in a USB host socket on a PC (MAC or Windows or Linux, for example) and they automatically get configured and are available for use - just as you would use a computer hard drive.
If that is not happening, then there is a good possibility that the stick is not properly formatted. If it is recognized, but you cannot access the data, then you may need to run the FORMAT utility on your computer. Be aware that this will erase any data currently on the stick.
If you KNOW that you have data on the stick, and it is important to you, then there are data recovery companies that will do their best to access the data (for a fee).
SOURCE: USB Memory Stick
You may link using tiny wire solder it as bridge. It will work if you solder accordingly. If you need further assistance please post the close shot picture of the broken area. Good Luck
SOURCE: memory sticks
First you have to make sure there is enough room on the memory stick. Plug in the USB stick and open My Computer. You should see a "removable device" on E or F. That is your memory stick. Right click and select properties. It will tell you how much free spce there is. Now check the size of the powerpoint presentation the same way: Navigate to it and right-click.
If there is enough free space, you're almost there. Right-click on the powerpoint file (ending in .ppt) and select copy. Then go back to my computer and open the F:\Removable device icon. Once inside the device, right-click and hit paste. You should see the .ppt file being copied onto the memory stick. When it is finished, right-click the F device again and hit eject.
SOURCE: Skymedi USB drive is not recognised on my computer
i have usb kingston 4 GB data mini traveler, and my problem usb detect skymidi usb drive i dont know skymedi. i don't want if have format,because there are many data which is of important.
how is it's solution.
thanks 4 all
by blurz
SOURCE: I need to know the steps to save data onto usb memory stick from accounting program
I suggest that you save your data with Simply Accounting and know where you save it. In window explorer, find the file you saved and copy it to the USB memory stick. You should see the USB memory stick as another drive in Windows Explorer. After the copy is complete, Click the USB memory stick and you should see the file. This way, the copy (back up) is confirmed.
SOURCE: display reads usb mode mass storage usb memory
it means that your camera is set to have the memorystick detected when connected to a computer. ( camera have options to have memorystick or internal memory detected by computer)
im not sure what you wat to do or are referring to if you are try to remove the password download dr freeware i have never used or had to use it it reads like it can remove passwords from any usb drives and if you are trying to use it but dont the basics
insert this drive into a
usb slot
click start click on my
computer you should see your usb drive or
click start all programs
accessories open windows explorer navigate to your usb memory stick then go to
the information you want to back up select the information right
click select copy then back to memory stick select then right
click select paste
or select the imformation
hold the cursor on then drag it to the memory stick and drop it into it
or select the
imformation right click and send to the memory stick
Hope this helps you
You can save the scanned data on a USB memory or a memory card by using the control panel.
IMPORTANT
- You can not use USB memory card and memory card simultaneously.
1 .Select Scan (Scan) on page HOME (HOME) and then press the OK button.
The screen where you select where the data should be saved is displayed.
2 .Turn the USB memory card direct print port or memory card into the slot.
3 .Select USB flash drive (USB flash drive) or memory card (Memory card) and then press the OK button.
4 .Select Save on USB disk (Save to USB flash). The screenshot Scan documents (Scan document) is displayed.
5. State the necessary settings and then press the OK button.
6. Place the original on the glass plate as shown on the LCD screen.
7. Press the [color] (Color) for scanning in color, or button [Black] (Black) for scanning in black and white.
When the preview is enabled, press the OK button after viewing the preview pane on the LCD screen.
The machine starts scanning and the scanned data is stored either on the USB memory card. Remove the original from the glass plate, the scan is complete.
REFERENCE
- You can only scan images continuously when you select PDF. Continue to scan the confirmation screen. You can save up to 100 pages of images in a PDF file.
- If the USB memory card or memory card becomes full while images are scanned, saved only images that are already scanned.
- You can save up to 2000 files of scanned data in both JPEG and PDF formats.
- Folder and filename of the scanned data stored on USB memory or memory card is as follows:
• Folder Name: (extensions: PDF): CANON_SC \ DOCUMENT \ 0001
• Folder Name: (File Extension: JPG): CANON_SC \ IMAGE \ 0001
• Filename: Serial number, starting from "SCN_0001"
• File dates: 01/01/2008
779 views
Usually answered in minutes!
×