I need a user guide for my aeware jacuzzi - Jacuzzi Home

The flashing on/off light in a Jacuzzi whirlpool bath may indicate an issue with the control system, and it's important to address the problem to ensure the proper functioning and safety of the whirlpool bath. Here are some general steps you can take to troubleshoot the issue:
1. Check the Power Supply:
- Ensure that the whirlpool bath is receiving power. Verify that the circuit breaker for the whirlpool bath is not tripped, and check for any loose or disconnected power cords.
2. Inspect the Control Panel:
- Examine the control panel for any visible issues, such as loose or damaged wires, connectors, or buttons. Ensure that there is no water or moisture present in the control panel area.
3. Reset the System:
- Some whirlpool baths have a reset function. Turn off the power to the unit, wait for a few minutes, and then turn it back on. This can sometimes reset the control system.
4. Refer to the User Manual:
- Check the user manual that came with your Jacuzzi whirlpool bath for specific information on troubleshooting and resetting the control system. The manual may provide insights into the meaning of the flashing light and how to address it.
5. Contact Jacuzzi Customer Support:
- If the issue persists and you cannot find a resolution through the manual, contact Jacuzzi customer support or the manufacturer for assistance. They may be able to provide guidance on how to troubleshoot and resolve the issue.
6. Professional Inspection:
- If you're not comfortable or able to identify and fix the issue, it's advisable to seek assistance from a qualified professional or a technician experienced in Jacuzzi whirlpool bath systems. They can perform a thorough inspection and diagnose and repair any electrical or control system problems.
It's essential to prioritize safety and follow proper procedures when dealing with electrical components and water. If you're uncertain or if the troubleshooting steps don't resolve the issue, it's best to seek professional assistance to avoid potential hazards.

Jacuzzi Is STILL a viable SPA / Whirlpool Entity...

If you know the age of the equipment...
It may actually date back to when Jacuzzi
headquarters was right here in the San Francisco Bay Area.

Now SFSpas.com ... 510-527-5547
Paradise Valley Spas The Bay Area Top Hot Tub Retailer

Richmond, California (to be specific... (on Jacuzzi Street)).

((I was sad when they left).. but am still a happy customer).

Air "switches" remain their most popular trouble...

and if you know what yours LOOKS like... you
can VERY LIKELY still buy the parts from eBay...

I recommend going to Jacuzzi... (opinion).

Carnac the Magnificent

Good luck Scott Jones...

I've been looking for some specifics on Jacuzzi (seacrest) faucets... for a couple of years...

Since before Jacuzzi moved out of the EAST-BAY area (here) they had pretty good stuff.

I have their "washerless" ceramic faucets..
Through trial & error I've been able to keep these working...

No thanks to the so called "Jacuzzi" (moved out of CALIFORNIA).

Not only were they not helpful when I told them I didn't want their NEW STUFF...

I only wanted to service what I've had for 30 years
(controls sound like what you have)

Try calling these folks... At least they know what JACUZZI used to mean... GOOD STUFF:

Jacuzzi of El Cerrito ... (510-) 527-5547
5327 Jacuzzi St Ste 2c,
Richmond, CA 94804

Toll FREE... Call 888-738-5523

Hope this helps.

Hot Tubs Swim Spas Saunas in California Sales Service Paradise Valley Spas

Jacuzzi Whirlpool Bath JWB 1 2 Air Volume Control Elbow PA54000 U775000...

Page 28 has ER codes.
P1 - ER
System hasn't detected any current change when turning
Pump 1 on or off
https://spacare.com/productimages/pdfmanuals/Gecko/Service_manual%20in_xm.pdf

Sorry frank dont no whats aeware

here's a site where I found tons of jacuzzi parts and accessories.
http://calwesthot1.reachlocal.net/AdvancedSearch.aspx
under select catagory scroll about half way down to jacuzzi pumps and hit search.
If you find what you need can I borrow the jacuzzi .. lol

the rotary drain kit is just a drain kit that allows the user to open and close the drain via the rotary handle at the overflow..........it is mostly for aesthetics

Go to Jacuzzi.com and plug in model and serial no. you should be able to find an operation manual there.

No serviced by pool technician. But you can look in your breaker box for a popped breaker, it should be 20 amp and be positioned in the middle instead of on or off position. Kirk

Kathy,

I think what you're looking at are the part numbers for the heater and control systems used in some Jacuzzi hot tubs rather than the Jacuzzi model number. I ran into the same issue and discovered through some cross-referencing on the web (jacuzzi parts suppliers) that this is the part number control unit made by Balboa. Odds are they were used in multiple Jacuzzi models.

My suggestion: Look here http://clearcreekspas.com/model_id.html to identify the control panel for your Jacuzzi and then follow the link to the correct manual. Some cover multiple models so you will need to know the electrical requirements of yours (120 V or 240 V?) and then check the layout of each tub shell to determine which model is yours.

I figured out mine is a Jacuzzi Essence Model 350 this way.

Good luck!