My 3500 fic tongue jack is bent how do I get it apart

Contact your local service center directly or online here

there is a reset button on the tongue jack

The micro usb charging port on the nexus 7 is notorious for becoming useless b/c cords fit loosely in the port right out of the box. Micro usb cords get wiggled and jiggled because of the size of the opening and then the port will no longer charge b/c solder breaks from the board, or the tongue inside the port partially breaks apart.

You can buy the replacement micro usb / headphone jack assembly for about $50 and do the repair yourself (hopefully) ...or you can send it to us and we\'ll replace just the jack and ship it back to you all for $54.95

More info and our repair form is on this page:

http://www.rockhoptec.com/services.php#t...

There is no lateral adjustment apart from brute force to bend the tongue on the bottom of the motor housing that engages into the pedestal at the hinge. I can\'t see what else could be bent laterally. You may be able to overcome it by tilting the chrome bowl engagement ring in the pedestal base, a washer or two between the chrome ring and the pedestal with one of the 3 screws through it. Trial & error.

not really, sounds like you linkage is either bent or if a cable its.rusting or starting to come apart best thing to do is, jack up your car and follow the shift linkage from the shifter to the transmission, then inspect it and replace if bent, or cable if rusted or coming.apart

Hello try to download the manual from here:

http://www.fic.com.tw/support/motherboard/motherboard.aspx?model_id=109

The manual will show you how to connect the wires.
Or visit INTEL here:

http://www.intel.com/support/motherboards/desktop/sb/cs-015851.htm

You probably need the AC97 configuration, Not the HDAUDIO
If you connect it wrong you will burn the sound chip !!!!!!!

Best of luck

yes.

The micro usb charging port on the nexus 7 is notorious for becoming useless b/c cords fit loosely in the port right out of the box. Micro usb cords get wiggled and jiggled because of the size of the opening and then the port will no longer charge b/c solder breaks from the board, or the tongue inside the port partially breaks apart.

You can buy the replacement micro usb / headphone jack assembly for about $50 and do the repair yourself (hopefully) ...or you can send it to us and we\'ll replace just the jack and ship it back to you all for $54.95

More info and our repair form is on this page:

http://www.rockhoptec.com/services.php#t...

ftp://ftp.fic.com.tw/motherboard/bios/socket775/p4m-915gvd1

http://www.fic.com.tw/press.aspx?pr_id=138

http://www.fic.com.tw/product/motherboard/intel/p4m-915gd1.aspx

http://www.fic.com.tw/product/motherboard/intel/p4m-915pd1.aspx

photo:
http://www.fic.com.tw/product/motherboa ... 915gd1.jpg

specs:
http://www.fic.com.tw/product/motherboa ... 15pd1.aspx

download page for BIOS & DRIVERs and link to empty manual:
http://www.fic.com.tw/support/motherboa ... del_id=159

empty manual:
http://www.fic.com.tw/support/motherboa ... del_id=159

hope some of these help

The hood,Canopy has to be snapped apart at the bottom, then slid upwards to disengage the retainer tongues at the top, of which there are three. Then I was able to see that the connecting rod on the damper which causes the ice dispenser door to close slowly, was bent and about to break and interfering with the dispenser door flap not to close fully.

There is no FIC V11. There is FIC VC11. Click on the link included;
http://www.fic.com.tw/support/motherboard/motherboard.aspx?model_id=35
Download the user manual.

Luck!
Mike