SOURCE: Fault code
speaker cord connector problem:-
remove all speaker connectors and insert it one by one each time until you find the bad one and change its connector with a new one.
(you must play something and listen).if all above does not work you will have problem in power supply and need to fix.
SOURCE: panasonic home cinema model sa-ht75
Hi,
F61 error codes could either be IC501 or the regulator (IC502) in the power supply section.
For reference, pls view these two (2) posts here and here of similar concern on other models.
Other possibilities are:
1. fan not turning;
2. cold solder;
3. looses connections;
4. one of the other components/systems hooked up to the power supply is causing a fault (tuner, disc player).
Hope this be of additional help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards.
Thank you for using FixYa.
SOURCE: My receiver for the Panasonic-SA-HT800V is toast
ebay? the speakers can only be used with this model..unless you strip the speaker wire...
SOURCE: I have no manual - can't get the sound to work
http://www.nodevice.com/user_manual/panasonic/dvd_cd/sa-ht75.html
http://service.us.panasonic.com/OPERMANPDF/SCHT95.PDF
Testimonial: "Thank you very much for your help. I now have a manual thanks to you. Cheers"
SOURCE: I have the SA. HT75 Panasonic Home theater DVD system
There is a short in the power section. Unit will also shut down.
80 views
Usually answered in minutes!
×